Figure 7A. 42” Blade - Group 1
1 Member
Figure 7D. 42” Blade - Group 4
From Top Down
Figure 76. 42” Blade - Group 2
Figure 7E. 46” Blade - Group 3
Figure 7C. 42” Blade - Group 3 | Figure 7F. 46” glade - Group 4 |
Figures 7A thru 7F. Spring Installation
8 . Lower push bar and install dozer blade with kingpin (A, figure 2), spring clip, and pivot pin(B). Reattach rod guide (D) and secure with cotter pin (C).
9.Tighten capscrew (A, figure 4 or 5) and nut which hold chain to tractor frame.
10.Perform Lift Rod Adjustment as instructed in Operator’s Manual for your Snow Plow/Dozer Blade.
3’.
