Snapper 1695299, 1693706 installation instructions Installation Instructions, Install Deflector

54”Turbo Blower Installation Instructions

A

C

E

B

D

A

B

	C
	D
D	E

C

E F

Figure 3. Install Cover & Spring Anchor

A. Taptite Screw	D. Roller Bar Retainer
B. Spring Anchor	E. New Arbor Cover Assy.
C. Cover Clip

Install Deflector

1.Locate the taptite screw (A, Figure 3) securing the inner right-hand belt cover spring clip (C). Remove the taptite screw (A).

2.Install the spring anchor (B) above the belt cover clip

(C) and secure using the original taptite screw (A).

3.Install the new right hand belt cover assembly (E) using the original taptite screws removed in Step 1.

4.Assemble the hinge rod (B, Figure 4) and hinge bracket (F). Secure using the rod anchors (A), 1/4-20 x 5/8 capscrews (E), lockwashers, and nuts as shown.

5.Drill four 13/64” holes at the marked locations on the underside of the deflector assembly (E, Figure 5).

6.Secure the deflector (C, Figure 5) to the deflector hinge assembly (B) using four 10-24 x 3/4 truss head screws (D) and nylock nuts (A). Insert the screws from the bottom.

Figure 4. Assemble Hinge
A. Rod Anchors	D. 1/4-20 Nut
B. Hinge Rod	E. 1/4-20 x 5/8 Capscrew
C. 1/4” Lockwasher	F. Hinge Bracket

A

B

C

E

D

Figure 5. Assemble Deflector

A.10-24 Locknut

B.Hinge Assembly

C.Deflector

D.10-24 x 3/4 Truss Head Screw

E.13/64 Holes

5