Table of Contents | Snapper 1694389, 1725580 specification

Table of Contents

Safety Rules & Information
General Warnings	2
Safety Decals	2
General Operating Information
Mowing with the Triple Catcher	3
Recommended Accessories	3
After Operation	3
Initial Hitch Installation -
Models without 3-point Hitch

Assemble Catcher Bags	8
Install Cover	8
Removing & Reattaching the Triple Catcher
Removing the Grass Catcher	9
Reattaching the Grass Catcher	10
Storing the Grass Catcher	11
Hardware Identification
& Torque Specifications	12

NOTE: In these instructions, “left” and “right” are referred to as seen from the operating position.

Install Hitch	4
Initial Hitch Installation -
Models with 3-point Hitch
Install Hitch	5
Initial Collector Assembly - All Models
Assemble Front & Back Plates	6
Assemble Tubes & Deflector	7

1

Image 2

Snapper 1694389, 1725580 manual Table of Contents

Contents

Clean Sweep Triple Catcher OPERATOR’S Manual Table of Contents Decal Warning Do Not Open Cover Part Number Safety DecalsAttachment Decals Mowing with the Catcher Required AccessoriesBefore Operation After Operation Install Hitch Install Back Plate Hair Pin Clip Hitch Pin Lower Spacer Lift arm must Hole Initial Installation & Assembly Assemble Front and Back Plate Assemble Tubes & Deflector Holes for 54 Mowers Holes for 48 & 60 Mowers See Figure Install CoverAssemble Catcher Bags Removing the Grass Catcher Remove the Cover Hinge Hinge Pin Hair Pin Clip Models with 3-Point Hitch Reattaching Grass CatcherModels with out 3-Point Hitch Bags Back Plate Hardware Identification & Torque Specifications