Features & Controls
CONTROL LOCATIONS
The information below briefly describes the function of individual controls. Starting, stopping, and driving require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.
1,2.. Speed Selector
Selects forward speeds
Traction Control / Free Hand™ Lock
Engages traction drive to wheels when depressed. Also locks auger control when depressed simultaneously. Releasing the traction control lever releases the Free Hand™ auger control lock and stops the drive wheels.
Fuel
Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fuel tank. Close the valve when the snowthrower is not in use. Open the valve before starting.
Starter Handle
Used to
Auger Control
Engages the auger/impeller when depressed. Releasing the control stops the auger/impeller.
Chute Direction Control
Rotates the discharge chute to desired position.
Primer Button
Primes carburetor for faster cold starting.
Engine Key
Prevents starting of engine without key. Stops engine when removed.
Chute Deflector Knob | Choke Knob |
Locks chute deflector in desired position. | Adjusts air/fuel mix for easier cold weather starting. |
Traction Lock Pins | On/Off Switch |
The traction drive to each wheel can be locked and | Prevents starting of engine. |
unlocked with the Traction Lock Pins (H, Figure 4) to per- |
|
mit the unit to |
|
dling and transport of the snowthrower. |
|
Electric Start Button (Optional) |
|
Activates electric starter. |
|
9
