Snapper 1807-1 How to Use Adjustable Nozzle, Applying Detergent with the Adjustable Nozzle

Models: 1807-1

1 20
Download 20 pages 41.41 Kb
Page 9
Image 9
How to Use Adjustable Nozzle

Snapper 2300 PSI Pressure Washer

How to Use Adjustable Nozzle

You should now know how to START and STOP your pressure washer.The information in this section will tell you how to adjust the spray pattern and to apply detergent or other cleaning chemicals.

1.Slide nozzle forward when you wish to adjust spray to low pressure mode (Figure 9). Slide nozzle backward to achieve high pressure.

Figure 9 — Adjusting Nozzle for Pressure

Slide nozzle backward

Slide nozzle forward for low

for High Pressure

pressure mode and

Mode

detergent application

3.Twisting nozzle adjusts spray pattern from a narrow pattern to a fan pattern (Figure 11).

Figure 11 — Adjusting the Nozzle for Spray Pattern

Rotate nozzle

Rotate nozzle clockwise

counterclockwise for fan

for narrow spray pattern

spray pattern

 

4.For most effective cleaning, keep spray nozzle from 8 to 24 inches away from cleaning surface.

5.If you get spray nozzle too close, especially using high pressure mode, you may damage surface being cleaned.

6.DO NOT get closer than 6 inches when cleaning tires.

2.Point nozzle down towards a firm surface and press trigger to test spray pattern (Figure 10).

Figure 10 — Testing the Spray Pattern

Applying Detergent with the Adjustable Nozzle

IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump.

CAUTION

You must attach all hoses before you start the engine.

Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

Damage to equipment resulting from failure to follow this instruction will void warranty.

To apply detergent, follow these steps:

1.Review use of adjustable nozzles.

2.Prepare detergent solution as required by job.

3.Place filter end of chemical injection hose into detergent container.

CAUTION

Keep the chemical injection tube from coming in contact with the hot muffler.

When inserting the filter into a detergent solution bottle, route the tube so as to keep it from inadvertently contacting the hot muffler.

9

Page 9
Image 9
Snapper 1807-1 owner manual How to Use Adjustable Nozzle, Applying Detergent with the Adjustable Nozzle