Troubleshooting, Adjustments, & Service

ROLLER BAR LEVELING (SELECT MODELS)

The rollers on this Zero Turn unit are not intended to ride on the ground. DO NOT adjust rollers to ride on the ground. Rollers riding on the ground will damage turf and or unit.

1.First level the mower deck using the procedure found in MOWER DECK LEVELING.

2.With the mower installed, place the rider on a smooth, level surface such as a concrete floor. Turn the front wheels so they are straight.

3.Place the mower cutting height pin in the 4th hole from the bottom (C, Figure 30).

4.Measure the distance between the outside ends of the roller bar and the ground. If there is more than 1/8” (3mm) difference between the measurements on each side, proceed to step 5.

5.Locate the roller bar leveling eccentric and locknuts (A, Figure 32). Loosen the locknut and turn the eccentric to raise or lower a side. When the correct level is achieved, hold the eccentric with a wrench and tighten the locknut. Repeat step 4 if necessary.

MOWER BELT REPLACEMENT

To avoid damaging belts, DO NOT

PRY BELTS OVER PULLEYS.

1.Park the rider on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the parking brake, turn off the engine, and remove the ignition key.

2.Raise the mower deck to transport position. Pull the lever (A, Figure 34) towards the rear of the machine to release tension on the mower belt. Secure the lever in the guard notch (B).

3.Remove the old drive belt and install the new one as shown in Figure 33. Note that the back of the drive belt must ride against the back-side idler pulleys (B). Use the belt tension lever (A, Figure 34) to release tension on the idler pulley for installation.

A

Figure 32. Roller Bar Leveling

A. Eccentric and Locknut

A

C

 

B

A

 

A

 

 

D

Figure 33. Mower Belt Routing

A.Arbor Pulleys

B.Back-Side Idler Pulleys

C.PTO Pulley

D.Belt Tension Release Lever

B

A

Figure 34. Release Belt Tension

A.Belt Tension Release Lever

B.Guard Notch

30

Page 31
Image 31
Snapper 19HP, 20HP user manual Roller BAR Leveling Select Models, Mower Belt Replacement

19HP, 20HP specifications

The Snapper 20HP and 19HP lawn tractors are robust and efficient machines designed for both residential and commercial lawn maintenance. These models are recognized for their durability, comfort, and innovative technology.

One of the standout features of the Snapper 20HP and 19HP is their powerful Briggs & Stratton engine. With an impressive horsepower rating, these tractors can handle a variety of tasks ranging from mowing to towing. The engines are designed for easy starting, reliability, and long-lasting performance, ensuring that users can tackle even the toughest jobs without hesitation.

Both models boast a wide cutting deck, providing excellent mowing coverage and reducing the number of passes needed to achieve a well-manicured lawn. The cutting heights are adjustable, allowing users to customize the grass height according to their preferences. The 20HP version typically features a slightly larger deck, enhancing its efficiency for larger properties.

Comfort is a key aspect of the Snapper tractors. They come equipped with an ergonomically designed seat that offers ample support during prolonged use. The placement of controls is such that they are within easy reach, allowing for smooth operation. Additionally, the models provide a tight turning radius, making navigation around obstacles like flower beds and trees seamless.

Technologically, the Snapper 20HP and 19HP integrate features such as a hydrostatic transmission system. This provides users with a smooth driving experience and precise control over speed and direction without the need for shifting gears. The hydrostatic drive also minimizes wear and tear, extending the lifespan of the tractor.

Another notable characteristic of these models is their durable construction. Built with high-quality materials, the Snapper tractors are designed to withstand the rigors of frequent use. The chassis is sturdy, ensuring stability and support even on uneven terrain.

Maintenance is simplified with these tractors, featuring easy-access components that allow for quick servicing and upkeep. Regular maintenance checks can be performed without hassle, contributing to the tractors' longevity.

In conclusion, the Snapper 20HP and 19HP lawn tractors are ideal choices for homeowners and professionals alike. Featuring powerful engines, comfortable operation, innovative technology, and a focus on durability, these models ensure effective lawn care and performance for years to come.