MOWER ADJUSTMENTS

WARNING

Before checking mower, shut off PTO and engine, remove the key, and allow all moving parts to stop.

Cutting Height Adjustment

The cutting height adjustment lever (A, Figure 37) con- trols the mower cutting height. Push the button to release the lever. Move the lever back to raise the deck and forward to lower it.

Troubleshooting, Adjustment, & Service

A

Figure 35. Mower Cutting Height Adjustment A. Adjustment Lever

Leveling The Mower

If the cut is uneven, the mower may need leveling. Unequal or improper tire pressure may also cause an uneven cut. Make sure tire pressure is correct as speci- fied in Checking Tire Pressure.

SIDE-TO-SIDE LEVELING

1.With the mower installed, place the tractor on a smooth, level surface such as a concrete floor. Turn the front wheels straight forward.

2.Check for bent blades and replace if necessary.

3.Place the mower in mid-cut position. Arrange the outside mower blades so that they are pointing from side-to-side.

4.Measure the distance between the outside tips of each blade and the ground. If there is more than 1/8” (3mm) difference between the measurements on each side, proceed to step 5. If the difference is 1/8” (3mm) or less, proceed to step 6.

5.See Figure 36. Hold J-Hook (A) turn locknut (B). Turn the locknut (B) to raise or lower either side of mower.

FRONT-TO-BACK LEVELING

6.Arrange the blades so they face front-to-back.

7.Measure the distance from the ground to the front tip of the center blade, and from the ground to rear tips of left-hand and right-hand blades.

Front tip of the center blade should be 1/4" (6mm) higher than rear tips of left-hand and right-hand blades. If not, proceed with steps 8 - 9.

8.To raise front of mower deck, loosen front nut (B) and turn rear nut (A, Figure 37) against bracket. To lower front of mower deck, loosen rear nut (A) and the bracket will move backwards to lengthen rod.

9.Re-check the blade measurement then tighten the front nut (B) against the bracket to secure.

A

B

A

B

Figure 36. Leveling The Mower Side-to-Side

A.J-Hooks

B.Locknuts

BA

Figure 37. Leveling The Mower Front-To-Back

A.Rear Nut

B.Front Nut

33

Page 34 Page 36
Page 35
Image 35
Snapper RD Series, 2400 XL Series manual Mower Adjustments, Cutting Height Adjustment, Leveling The Mower
Page 34 Page 36

RD Series, 2400 XL Series specifications

The Snapper 2400 XL Series and RD Series represent the pinnacle of outdoor power equipment, embodying a perfect blend of performance, durability, and user-friendly design. Engineered for both residential and commercial applications, these models are specifically crafted to cater to a wide range of mowing needs.

The Snapper 2400 XL Series, known for its robust construction, features a powerful engine that delivers exceptional performance and reliability. With a cutting deck size that varies, users can choose options ranging from 21 inches to 30 inches, ensuring versatility for different yard sizes and conditions. This series utilizes a patented rear-engine design which provides superior visibility and maneuverability, making it ideal for navigating tight spots and landscaping around obstacles.

One of the standout technologies in the 2400 XL Series is the Instant Response Transmission. This system allows for smooth acceleration and responsive steering, which enhances user control. Additionally, the mowers are equipped with an adjustable cutting height feature, allowing for precision mowing to accommodate varying grass types and conditions.

Transitioning to the RD Series, it boasts a unique dual-blade system that enhances cutting efficiency. The dual blades create finer clippings, which decompose faster, resulting in healthier grass. The RD Series is designed with heavy-duty wheels and a reinforced steel frame, ensuring it can handle the rigors of challenging terrains while maintaining stability and control.

Both series highlight Snapper's commitment to comfort and user experience. Each model is ergonomically designed with comfortable grips and adjustable seating, reducing fatigue during extended mowing sessions. Moreover, the easy-start engine technology ensures that users can get to work without fuss, even in cold weather conditions.

Durability is a key characteristic of both the 2400 XL and RD Series. Constructed with high-quality materials, including corrosion-resistant surfaces, these mowers are built to withstand the elements and provide long-lasting performance. With exceptional warranty options, users can rest assured knowing their investment is protected.

In summary, the Snapper 2400 XL Series and RD Series incorporate advanced technologies and features designed to enhance mowing efficiency, comfort, and durability. With a focus on performance and ease of use, these mowers are ideal for homeowners and landscaping professionals alike, ensuring a clean, precise cut season after season. Users can confidently choose Snapper for their outdoor power equipment needs, knowing they are backed by a brand renowned for innovation and quality.
Top Page Image Contents