Safety Rules & Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

1.Read, understand, and follow all instructions in the manual and on the unit before starting.

2.Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

3.Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).

4.Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade(s).

5.Be sure the area is clear of other people before mow- ing. Stop the unit if anyone enters the area.

6.Never carry passengers.

7.Do not mow in reverse unless absolutely necessary. Always look down and behind before and while travel- ling in reverse.

8.Never direct discharge material toward anyone. Avoid discharging material against a wall or obstruc- tion. Material may ricochet back toward the operator. Stop the blade(s) when crossing gravel surfaces.

9.Do not operate the machine without the entire grass catcher, discharge guard (deflector), or other safety devices in place.

10.Slow down before turning.

11.Never leave a running unit unattended. Always disen- gage the PTO, set parking brake, stop engine, and remove keys before dismounting.

12.Disengage blades (PTO) when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

13.Operate the machine only in daylight or good artificial light.

14.Do not operate the unit while under the influence of alcohol or drugs.

15Watch for traffic when operating near or crossing roadways.

16.Use extra care when loading or unloading the unit into a trailer or truck.

17.Always wear eye protection when operating this unit.

18.Data indicates that operators, age 60 years and above, are involved in a large percentage of power equipment-related injuries. These operators should evaluate their ability to operate the equipment safely enough to protect themselves and others from injury.

19.Follow the manufacturer’s recommendations for wheel weights or counterweights.

20.Keep in mind the operator is responsible for accidents occurring to other people or property.

21.All drivers should seek and obtain professional and practical instruction.

22.Always wear substantial footwear and trousers. Never operate when barefoot or wearing sandals.

23.Before using, always visually check that the blades and blade hardware are present, intact, and secure. Replace worn or damaged parts.

24.Disengage attachments before: refueling, removing an attachment, making adjustments (unless the adjustment can be made from the operator’s posi- tion).

25.When the machine is parked, stored, or left unattend- ed, lower the cutting means unless a positive mechanical lock is used.

26.Before leaving the operator’s position for any reason, engage the parking brake (if equipped), disengage the PTO, stop the engine, and remove the key.

27.To reduce fire hazard, keep the unit free of grass, leaves, & excess oil. Do not stop or park over dry leaves, grass, or combustible materials.

28.It is a violation of California Public Resource Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal areas may have similar laws.

TRANSPORTING AND STORAGE

1.When transporting the unit on an open trailer, make sure it is facing forward, in the direction of travel. If the unit is facing backwards, wind lift could damage the unit.

2.Always observe safe refueling and fuel handling prac- tices when refueling the unit after transportation or storage.

3.Never store the unit (with fuel) in an enclosed poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and animals.

4.Always follow the engine manual instructions for storage preparations before storing the unit for both short and long term periods.

5.Always follow the engine manual instructions for proper start-up procedures when returning the unit to service.

6.Never store the unit or fuel container inside where there is an open flame or pilot light, such as in a water heater. Allow unit to cool before storing.

4

Page 6
Image 6
Snapper 2690627, GT 600 Series, STGT2754D manual Safety Rules & Information, General Operation

2690627, STGT2754D, GT 600 Series specifications

The Snapper GT 600 Series, specifically the STGT2754D model, is a standout in the realm of high-performance lawn care equipment. Designed for both efficiency and durability, this mower is perfect for homeowners with medium to large lawns who seek both power and reliability in their outdoor equipment.

One of the key features of the Snapper GT 600 Series is its robust 27 horsepower engine. This powerful engine enables the mower to tackle tough terrains and thick grass effortlessly. The innovative design includes a cutting deck size of 54 inches, which allows for a wide cutting path that reduces mowing time and enhances productivity. The adjustable cutting height provides multiple settings, accommodating various grass types and preferences, from a low, manicured look to a higher cut for more rugged areas.

The Snapper GT 600 Series incorporates advanced engineering with its high-performance transmission system. This system provides smooth acceleration and effortless steering, ensuring that maneuvering around obstacles like trees and flower beds is a breeze. The quick-turn radius enhances this maneuverability, allowing the operator to navigate tight spaces with confidence.

Technology plays a significant role in the GT 600 Series. The mower boasts an intuitive dashboard equipped with user-friendly controls, including easy-to-read displays for speed and fuel level. This feature not only enhances user experience but also promotes efficiency by allowing the operator to monitor essential metrics in real time.

Another notable characteristic of the STGT2754D is its durability. Built with a robust steel frame and heavy-duty components, this mower is designed to withstand the rigors of regular use. The weather-resistant materials ensure longevity and reliability under various conditions, making it a wise investment for any lawn care enthusiast.

Moreover, the Snapper GT 600 Series prioritizes user comfort. The high-back seat is designed for extended use, providing ample support and reducing fatigue during longer mowing sessions. Additionally, the vibration dampening system minimizes discomfort, enhancing overall control and driving experience.

In conclusion, the Snapper GT 600 Series STGT2754D is a powerful, technologically advanced lawn mower designed for efficiency and ease of use. Its combination of a robust engine, wide cutting deck, advanced transmission system, and user-friendly features make it a top choice for homeowners seeking to achieve a pristine lawn with minimal effort. Whether you're a seasoned gardener or a novice, the Snapper GT 600 Series promises to deliver performance and reliability for all your lawn care needs.