Snapper 6200W Portable Generator
KNOW YOUR GENERATOR
Read this Operator’s Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Rocker Switch
Fuel Tank
Oil Fill Cap/Dipstick
120 Volt AC, 20 Amp
Duplex Receptacles
Recoil Starter
Choke Lever
Air
Cleaner
Circuit Breakers
120/240 Volt AC,
30 Amp Receptacle
Grounding Fastener
Data Tag
120 Volt AC, 20 Amp, Duplex Receptacles — May be used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of
120and/or 240 Volt AC, 30 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.
Air Cleaner — Protects engine by filtering dust and debris out of intake air.
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Push to reset circuit breakers are provided to protect the generator against electrical overload.
Data Tag — Provides model, revision and serial number of generator. Please have these readily available when calling for assistance.
Fuel Tank — Capacity of seven (7) U.S. gallons.
Grounding Fastener — If required, please consult a qualified electrician, electrical inspector, or local agency having jurisdiction.
Oil Fill Cap/Dipstick — Check and fill engine with oil here.
Recoil starter — Used to start the engine.
Rocker Switch — Set this switch to "On" before using recoil starter. Set switch to "Off" to switch off engine.
5
