Dealer Setup
& Adjustment Instructions
319 Series Single Stage Snowthrower
This Dealer Setup Instruction applies to the following units:
319 Series Snowthrowers
Mfg. No. Description
1694382 319M, 3HP Snowthrower, Manual Start
1694383 319E, 3HP Snowthrower, Electric Start
These instructions may cover additional models issued after their printing. Refer to the Dealer Setup Binder Index for complete listings.
ATTENTION SETUP PERSONNEL:
The safety warnings provided in this guide and in the operator's manual included with the unit contain important information that must be
obeyed when assembling,
These warnings are highlighted by the safety alert trian- gle symbol shown above, which signifies that an impor- tant safety message is being provided.
You must read, understand, and follow these warn- ings and instructions, and use safe shop and work practices at all times while working on or around this unit and all other outdoor power equipment.
Sections and items denoted by the Setup sym-
bol provide the information necessary to fully assemble, test, and prepare the units
described above for delivery to your customers.
A Quick Setup List is provided on page 3 of this booklet to help you identify and check that the items have been performed.
TABLE OF CONTENTS: |
|
SAFETY RULES | 2 |
SETUP PROCEDURES |
|
Quick Setup List | 3 |
Unboxing and Assembly | 4 |
Fill Gas Tank | 5 |
Auger Cable Adjustment | 6 |
Test Run | 6 |
Snapper Form No. 24536 Simplicity Form No.
4/2003 | 1 | TP |