Section 2 - OPERATING INSTRUCTIONS

2.3 STARTING & OPERATION

2.3.1. ENGINE (ELECTRIC START)

IMPORTANT: When the ignition key is turned to “START”, the engine will turn over, but willnot start unless the Clutch/Brake pedal is pressed all the way down, the Blade Lever is in the “OFF” position (See Figure 2.5). The operator should be in the seat. Start engine as follows:

1.Move transmission shift lever to (N) Neutral position. DO NOT start engine with transmission shift lever in a drive position.

WARNING

It is possible to start engine with transmission shift lever in a drive position. Follow starting instructions carefully.

2.Make certain the Blade Lever is in the “OFF” position. See Figure 2.4.

BLADE LEVER IN “OFF” POSITION

RELEASE BLADE

PEDALS

TO START ENGINE,

PUSH CLUTCH/BRAKE

PEDAL ALL THE WAY

DOWN

PARKING

BRAKE

LATCH

FIGURE 2.5

CHOKE

POSITION

ENGINE

SPEED

CONTROL

FIGURE 2.4

3.Press Clutch/Brake Pedal all the way down and hold while starting engine. See Figure 2.5.

4.Open vent on fuel filler cap by turning counterclockwise. IMPORTANT: Failure to open vent on the fuel filler cap can cause engine to stall. See Figure 2.2.

5.Move engine speed control to the choke position to start a cold engine. See Figure 2.6.

6.Turn key to the “START” position until engine starts. See Figure 2.7. NOTE: If after 5 seconds of cranking the engine and it does not start, release the key, make sure the Clutch/Brake Pedal is fully depressed and attempt starting again after waiting for approximately 20 seconds.

7.After engine starts, move engine speed control to the “FAST” position, allow a brief warm-up until engine runs smooth.

FIGURE 2.6

KEY

FIGURE 2.7

(Continued on Next Page)

7

Page 6 Page 8
Page 7
Image 7
Snapper 301222BE, 331522KVE, 3314522BVE, 281222BE Starting & Operation Engine Electric Start, On Next
Page 6 Page 8

301222BE, 281222BE, 3314522BVE, 331522KVE specifications

Snapper 301222BE, 3314522BVE, 281222BE, and 331522KVE are advanced lawn care equipment offerings that cater to both residential and commercial users, emphasizing efficiency, durability, and innovative technology. Each model showcases unique features designed to optimize performance and enhance user experience.

The Snapper 301222BE model is known for its robust build, equipped with a powerful Briggs & Stratton engine that ensures reliable starting and sustained performance. Its Easy Start technology simplifies the ignition process, making it user-friendly even for novice operators. The 21-inch steel cutting deck provides a balanced mowing experience, ensuring even grass cutting with minimal effort. This model also features a dual (Rear and Side) discharge function, giving users flexibility in managing grass clippings.

Similarly, the Snapper 3314522BVE combines a powerful engine with a reinforced steel deck, ensuring durability and longevity. What sets it apart is its cutting-edge Smart Mulching technology, which finely chops grass clippings and redistributes them back into the lawn as natural fertilizer. This not only enhances lawn health but also reduces the need for additional lawn care products. The 3314522BVE also incorporates a user-friendly height adjustment lever, allowing operators to easily switch between cutting heights.

The Snapper 281222BE is designed with an emphasis on compactness without sacrificing power. It features a 19-inch cutting deck and a lightweight design, making it perfect for maneuvering around smaller lawns and tight spaces. The 281222BE also boasts an ergonomic handle for increased comfort during prolonged use, making it a perfect choice for homeowners seeking a practical and effective mowing solution.

On the other hand, the 331522KVE stands out with its innovative technology featuring a variable speed self-propulsion system, allowing users greater control over their mowing speed. This model also includes an integrated grass catcher which efficiently collects clippings, reducing cleanup time after mowing. The high-wheel design on this model enhances stability on uneven terrain, making it suitable for a wide range of lawn conditions.

In summary, Snapper’s range of models, including the 301222BE, 3314522BVE, 281222BE, and 331522KVE, exemplifies a blend of innovative engineering and practical design. With features tailored to meet diverse lawn care needs, these models represent a step forward in enhancing efficiency and ease of use in lawn maintenance. Whether for residential lawns or commercial landscapes, Snapper mowers are designed to deliver exceptional results while ensuring user comfort and satisfaction.
Top Page Image Contents