Snapper 400 Series manual Specifications, Engine, Transmission, Chassis, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a

piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not lim- ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max- imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip- ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

ENGINE

13 HP* Intek OHV — Briggs & Stratton

Horsepower	13 HP @ 3400 rpm
Displacement	21	Cu. In. (344 cc)
Electrical	12	Volt, 3 Amp D.C. Battery 230 CCA
Air Cleaner	Pre-Cleaned Air to Paper Filter
Oil Capacity	3 Pints (1.42 L)

16 HP* Command™ — Kohler

Horsepower	16 HP @ 3400 rpm
Displacement	27.9 Cu. In. (460 cc)
Electrical	12 Volt, 15 Amp Alternator Battery: 230 CCA
Oil Capacity	4 Pints (1.9 L)

TRANSMISSION

Hydro Models

TypeHydrostatic

Lubrication Transmission is a Sealed Unit

Ground Speeds Infinite Forward: 0-5.2 MPH (0-8.4 km/h) Reverse: 0-2.3 MPH (0-3.7 km/h)

CHASSIS

Front Wheels Tire Size 13 x 5.00-6

Pneumatic Inflation Pressure 10 -12 psi (,68 - ,82 bar)

Rear Wheels Tire Size 16 x 6.50-8

Pneumatic Inflation Pressure 10 -12 psi (,68 - ,82 bar)

Fuel Tank Material: Non-Corrosive Polyethylene Capacity: 2 Gallons (7.5 L)

Turning Radius Inside Rear Tire 12 In. (30.2 cm)

DIMENSIONS

Overall Length	61 In. (155 cm)
Overall Width
- w/30 mower		38.5 In. (97.8 cm)
- w/34 mower		45.5 In. (115.6 cm)
- at rear wheels		33	In. (83.8 cm)
Height at
- steering wheel		41	In. (104.1 cm)
- seat back		35	In. (88.9 cm)
- engine cover		28	In. (71.1 cm)
Wheel Base		43	In. (109.2 cm)
Weight (appx.)
- 13 HP w/34”mower		Net: 405 lbs. (183 kg)
- 16 HP w/34”mower		Net: 405 lbs. (183 kg)

31