Section 4 - ADJUSTMENTS & REPAIR

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda. DO NOT attempt to charge battery while installed on the machine. DO NOT use “BOOST” chargers on the battery.

4.6.3. BATTERY SERVICE

1.Remove battery. See Section on Battery Removal

2.Place battery in a well ventilated area on a level surface.

3.Using distilled water, refill cells as required to cover cell plates of which can also be visualized through the plastic battery case.

4.With cell caps removed, connect battery charger to battery terminals. Red to positive (+) terminal and black to negative (-) terminal.

5.Slow charge battery at 1 amp for 10 hours.

6.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery.

4.6.4. BATTERY STORAGE

If mower is to be stored out of season on its rear bumper, it is recommended the battery be removed, charged and stored.

1.Remove battery. (Refer to Section “BATTERY REMOVAL”).

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the RIDER on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

4.6.5.NEW BATTERY PREPARATION 1. Remove battery from carton.

2. Place battery in a well ventilated area on a level non-concrete surface.

3. Remove battery cell caps. Fill cells as required with electrolyte (purchased separately) to proper level. Fill to 3/16” above cell plates. Filling battery with electrolyte will bring the battery to 80% charged state.

4. With cell caps removed, connect battery charger to battery terminals; RED to positive (+) and BLACK to negative (-) terminal.

IMPORTANT: 3/16” above cell plates is the recommended level. DO NOT place anything in battery other than specified electrolyte.

WARNING

DO NOT attempt to charge battery while installed on the Riding Mower. DO NOT use “BOOST” chargers on the battery. DO NOT OVERFILL!

5.Slow charge the battery at 1 amp for 2 hours to bring the battery to full charge.

6.After charging, check level of electrolyte and add as needed to bring level to 3/16” above cell plates.

7.Reinstall cell caps.

8.Install battery into power unit. Refer to Section

“BATTERY INSTALLATION”.

9.Connect positive (+) cable (red) first, from wiring harness to the positive terminal (+) on battery using bolt and nut provided in hardware bag. Connect negative (-) cable (black) last, to negative terminal (-) on battery using bolt and nut. Apply a small amount of grease over terminals to prevent corrosion.

WARNING

Shield the positive terminal with terminal cover located on battery harness. This prevents metal from touching the positive terminal, which could cause sparks.

4.6.6.BATTERY TESTING

There are two types of battery tests: Unloaded and Loaded. The unloaded test is the procedure that will be discussed. It’s the simplest and most commonly used. An unloaded test is made on a battery without discharging current. To perform unloaded testing, check charge condition using either a hydrometer or voltmeter.

1.Using a voltmeter, voltage readings appear instantly to show the state of charge. Remember to hook the positive lead to the battery’s positive terminal, and the negative lead to the negative terminal.

2.A hydrometer measures the specific gravity of each cell. The specific gravity tells the degree of charge; generally, a specific gravity of about 1.265 to 1.280 indicates full charge. A reading of 1.230 to 1.260 indicates the battery should be charged. The chart on the next page shows the charge level as measured by syringe float hydrometer, digital voltmeter and five ball hydrometer.

(Battery Testing Chart on Next Page)

28

Page 27 Page 29
Page 28
Image 28
Snapper 421823BVE, W421623BVE Battery Service, Battery Storage, NEW Battery Preparation 1. Remove battery from carton
Page 27 Page 29

421823BVE, 421823BVE, W421623BVE specifications

Snapper 421823BVE and its variations, such as the W421623BVE, represent a significant advancement in outdoor power equipment, particularly in the world of lawn care. Designed with innovation and efficiency in mind, these mowers offer cutting-edge technology that enhances user experience while optimizing performance.

One of the standout features of the Snapper 421823BVE is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this mower provides the necessary power to tackle even the toughest grass and terrain. The engine is engineered for enhanced fuel efficiency, allowing users to maximize their mowing time without frequent refueling. Its durability and reliability make it a favorite among homeowners and professionals alike.

The Snapper 421823BVE is known for its advanced cutting technology. It utilizes a robust cutting deck that ensures a precise and even cut across varying grass types and heights. The 21-inch mowing deck makes it ideal for residential lawns, balancing maneuverability with effective operation in larger areas. The adjustable cutting height feature allows users to customize their mowing experience according to preference and seasonal requirements.

User convenience is a key focus in the design of the Snapper 421823BVE model line. The ergonomic handle design adds comfort during operation, reducing fatigue during extended use. The self-propulsion feature enhances ease of use, allowing the mower to glide effortlessly across lawns without excessive effort from the operator. Additionally, the compact design of these mowers aids in storage and transportation.

Snapper has also integrated modern technology into the 421823BVE models to improve performance. The inclusion of a mulch kit promotes healthy lawn care by returning nutrients back into the soil. Furthermore, the easy-start technology simplifies the ignition process, making it accessible for a wide range of users regardless of experience.

In conclusion, the Snapper 421823BVE and W421623BVE models embody a blend of strength, efficiency, and ease of use. With a powerful engine, advanced cutting features, user-friendly design, and innovative technology, these mowers provide an effective solution for anyone looking to maintain a pristine lawn. Whether for residential use or professional landscaping, these models deliver consistent performance that meets the demands of modern lawn care.
Top Page Image Contents