Snapper 447575 manual Step Grass Tube Installation

SECTION 1 – ASSEMBLY INSTRUCTIONS

STEP 8

GRASS TUBE INSTALLATION

A.Attach Tube Handle and Handle Base to Tube before installing Tube to catcher. Insert (2) 1/4-20 x 3/4” Carriage bolts through Handle Base and holes in Tube as shown. See Figure 1.18. Place Tube Handle over bolts followed by 1/4” Internal Tooth lock washers and secure with (2) 1/4-20 hex nuts. Tighten securely. See Figure 1.18.

HANDLE BASE

TUBE

HANDLE

FIGURE 1.18

B.Place deck in lowest cutting height setting.

C.Slide upper end of Grass Tube (end without Handle) into opening in Front Cover Assembly.

D.Slide lower end of Grass Tube over adapter and rotate towards mower to secure Handle Base under Latch. See Figure 1.19.

E.Adjust deck to desired cutting height.

ROTATE GRASS TUBE

TOWARDS MOWER

FIGURE 1.19

9