Operation

Mowing Height Adjustment

S/N: 2014509321 & Below:

The cutting height adjustment pin (A, Figure 6) controls the mower cutting height. The cutting height is adjustable between 1-1/2” (3,37 cm) and 4-1/2” (11,47 cm) in 1/4”

(0,64 cm) increments.

C

B

1. Depress the deck lift foot pedal (B) until it locks into the 4-1/2” (11,47 cm) position.

2. Place the cutting height adjustment pin in the desired cutting height.

3. S/N: 2014509321 & Below: Depress the deck lift foot pedal then push the lock lever (C) toward the right to release the lock.

A

S/N: 2014509322 & Above: Depress the deck lift foot

 

 

pedal then pull the lock lever (C) towards the rear of the

S/N: 2014509322

machine.

 

& Above:

4. Release the deck lift foot pedal until it comes to rest

 

 

 

against the cutting height adjustment pin.

A

C

 

ReproductionA

B

 

 

for

 

 

 

B

 

 

Not

Figure 6. Mowing Height Adjustment

 

 

 

 

A. Cutting Height Adjustment Pin

 

 

B. Deck Lift Foot Pedal

 

 

 

C. Deck Lift Lock lever

 

Foot Pedal Adjustment

 

 

 

The deck lift foot pedal can be adjusted to accommodate the

C

operator’s height for optimal comfort.

 

 

 

To adjust pedal position:

 

 

 

1. Remove the foot pedal (A, Figure 7) from the pedal

 

D

mount tab (B).

 

 

2.Remove the pedal mount hardware (C) and rotate the tab 180 degrees.

3.Reinstall the pedal mount hardware and tighten securely.

4.Reinstall the foot pedal on the pedal mount tab in the

proper orientation as shown in Figure 7.

Figure 7. Foot Pedal Adjustment

A. Deck Lift Foot Pedal

 

 

B. Pedal Mount Tab

 

C. Pedal Mount Hardware

 

D. Optional Position

15