WARNING
DO NOT operate machine without entire grass catcher or guards in place.
STEP 4: ADAPTER INSTALLATION
Hold the adapter in front of the deck. Align the adapter lugs with the hinge lug retainers, then push the adapter to the rear. Loosen bolts (see Figure 4) & bump the adapter, if necessary, to force the lugs under the lug retainers. Secure the adapter to the deck with the previously removed bolt, flat washer and wing nut (from step 2). Tighten bolts. See Figure 4.
FIGURE 4
STEP 5: Cover Hood Assembly. Install sector to the inside of cover using (3) 1/4 x 3/4” carriage bolts, 1/4 flat washers and 1/4 hex nuts. Slide screen into cover. Install inlet onto cover using (5) 1/4 x 1/2” carriage bolts and 1/4 hex flange nuts. See Figure 5.
STEP 6: Cover/Frame Installation. Lower cover/frame assembly onto bumper and secure with clevis pins and hair pins. See Figure 6.
STEP 7: Lift cover up for access to frame. Attach center brace to cover/frame with clevis pin and hair pin. Rotate center brace up and hook into adapter bracket. See Figure 7.
2
FIGURE 5
FIGURE 6
FIGURE 7
