#7600053 TWIN BAG CATCHER FRAME STIFFENER KIT FOR SNAPPER / SIMPLICITY RZT & JAVELIN TWIN BAG CATCHERS
The Twin Bag Catcher Frame Stiffener Kit is designed to provide extra support to the catcher frame.
! | WARNING | ! |
DO NOT attempt any adjustments, maintenance, repairs, or service with engine running. Stop engine. Engage parking brake. Remove key. Remove spark plug wire and secure wire away from spark plug. Engine, muffler and surrounding areas are extremely hot. Avoid serious burns; allow components to cool down before installing kit. Replace worn or damaged parts prior to operating. Use approved fuel container. DO NOT smoke near open fuel container. DO NOT fill fuel tank indoors or when engine is running. Allow engine to cool for at least ten minutes before refilling. Make sure that fuel cap is tightened securely. Wipe off any spilled fuel before starting engine.
Contents
1733432 | - Stiffener Bracket (1) | 1931338 | - 5/16 x | 1960686 - |
|
|
|
|
|
1720452 | - Tube Saddle Clamp (2) | 7091318 | - 5/16 x 3/4 Hex Capscrew (1) |
|
|
|
|
|
|
C | E |
G |
F |
D |
D |
C |
A |
B |
H |
C |
G |
D | F |
|
FIGURE 1
(Components removed for clarity)
STEP 1: Remove the debris containers from the catcher frame. Refer to the twin bag catcher instructions.
STEP 2: Remove the upper discharge tube from the hole in the right front of the cover assembly. Refer to the twin bag catcher instructions.
STEP 3: Remove the bridge pin and clevis pin from the hinge on the cover assembly, and remove the cover assembly from the catcher frame. Refer to the twin bag catcher instructions.
STEP 4: Remove the hardware securing the
STEP 5: Reinstall the
(Continued Other Side)
| INSTRUCTION No. 7101366 (I.R. 3/27/2007) |
1 | TP |