Snapper 7600053 manual Assembly Is Complete, INSTRUCTION No. 7101366 I.R. 3/27/2007

STEP 6: Install the supplied hex capscrew (H) through the hole in both the stiffener bracket and the channel assembly, securing with a flange nut (D). Tighten the hardware installed in Steps 5-6.

STEP 7: Using the hole in either end of the stiffener bracket as a template, drill two 11/32” thru holes (G) down through the U-tube.

STEP 8: Install the two remaining supplied carriage bolts

(C)down through the holes in the ends of the stiffener bracket and U-tube. Install one saddle bracket (F) up onto each bolt thread, and secure with a flange nut (D). Tighten securely.

STEP 9: Reassemble the twin bag catcher components removed in Steps 1-3. Refer to the twin bag catcher instructions.

ASSEMBLY IS COMPLETE

	INSTRUCTION No. 7101366 (I.R. 3/27/2007)
2	TP 200-5265-IR-AT-SN