Snapper Clean Sweep Triple Catcher manual Initial Collector Assembly, Assemble Catcher Bags

Initial Collector Assembly

A H G

F

E

B

	D
	C
Figure 1. Assemble Catcher Bags
A. Clip	E. Clamp
B. Cloth Bag	F. Nut
C. 5/16-18 x 3/4 Carriage Bolt	G. Lockwasher
D. Hanger Bracket	H. Wire Hoop

COLLECTOR ASSEMBLY

Assemble Catcher Bags

1.See Figure 1. Insert the wire hoop (H) through the cloth bag (B).

2.Install the clamp (E) and hanger bracket (D). Secure with two 5/16-18 x 3/4 carriage bolts (C), lockwashers

(G) and nuts (F).

Install Cover

1.See Figure 2. Hook the bags (A) on the back plate

(B).Note: If desired, the bags can be lined with 30 gallon trash bags for easy disposal.

2.See Figure 3. Set the cover (A) on top of the bags

(B)and align the hinges (C).

3.See Figure 4. Install the hinge pins (B) through the the hinges (C) and secure with a hair pin clip (D).

NOTE: Push the hair pin clips all the way on or they will be bent by the hinge when the cover is opened.

CAUTION

Before you begin operating the unit be certain you have read all of the safety and operational information of this instruction sheet, as well as the Operator’s Manual for the tractor and any other attachments.

B

A

Figure 2. Install the Bags

A.Bags

B.Back Plate

C

A

B

Figure 3. Install Cover

A. CoverC. Hinges

B. Bags

A

B

D

C

Figure 4. Install HInge Pins
A. Cover	C. Hinge
B. Hinge Pin	D. Hair Pin Clip

13