Snapper CSC2650, CSC18533 Engine Group 26 H.P, Item, Part No, Description, Footnotes, Manual No

Engine Group (26 H.P.)

Item	Part No	Qty	Description	Note
1	7027266	1	SCREW, 7/16-20 x 3” Hex Head Cap, GR5 (w/Nyloc Patch)
2	1918199	1	LOCKWASHER, Spring, .438
3	1708264	1	WASHER, Hex, .453 I.D. x 1-1/2”
4	2832747	1	TIE, Self Locking 3-5/8” Long
5	1717664	1	CLUTCH, Ogura JD-11
6	2828635	3	SCREW, 3/8-16 x 1-1/4” Hex Washer Head Taptite
7	1924940	1	WASHER, 3/8”, (.41 I.D. x .87 O.D. x .08 Thick)
8	7101717	1	RETAINER, Clutch
9	2154096	1	KEY, .250 Square x .91 Long Parallel
10	7101716	1	PULLEY, Engine - ZT
11	1931277	4	NUT, 5/16-18 Hex Whiz Lock Flange
12	1924856	4	SCREW, 5/16-18 x 1/2” Hex Washer Head Taptite
13	1921332	2	SCREW, 5/16-18 x 3/4” Hex Head Cap, Black
14	1733414A	1	AIR DUCT, Inlet
15	1726498	1	HOSE, Oil Drain, 16-1/2” Long
16	--	1	* ENGINE, 26HP B&S, ELS, Mod. 44P777-0141-B1
16	--	1	* ENGINE, 26HP, B&S, ELS-Calif., Mod. 44P777-0141-G1
17	1734169	1	SEAL, Foam Air Inlet
18	1734332	1	CONTROL, Throttle, .187 Cable 18.80 Long
19	1960295	5	SCREW, 1/4-20 x 5/8” Hex Whiz Lock Flange
20	1734246A	1	HEAT SHIELD, Muffler Top
21	1728017	1	HEAT SHIELD, Throttle
22	1960368	5	NUT, Speed, 1/4-20
23	1727939	1	HEAT SHIELD, Muffler Side
24	1734061	1	MUFFLER, 24 HP V-Twin ELS
25	1936228	4	SCREW, 5/16-18 x 3/4” Hex Head Cap, GR8
26	1917356	4	LOCKWASHER, Spring 5/16”, Black
27	1731214	2	GASKET, Exhaust
29	1734333	1	CABLE, Choke, 20” Long
30	7090390	1	WASHER, 3/8” Internal Tooth Lock
31	7091630	1	NUT, 3/8-24 Hex
32	7090999	2	SCREW, 1/4-20 x 5/8” Pan Head Taptite Torx
33	7091195	1	SCREW, #10-16 x 3/4” Pan Head Taptite Combo
34	7100529	1	KNOB, Throttle, Red
35	1734995	1	** HOSE, Fuel, Low Perm, 1/4” I.D. x 19-1/2” Long
36	7012222	2	CLAMP, Fuel Hose
37	1930591	1	SCREW, 5/16-18 x 3/4” Hex Flange Lock

Footnotes:

Note: * Purchase engine components directly from engine manufacturer dealer.

Note: ** See Frame, Body & Seat Group for fuel tank assy.

HYDRO DRIVE ZTR 33", 42" & 50"		Manual No. 7006269
150Z SERIES	25	TP 400-5417-IR-HZ-N