Snapper GLW407T-2 Description, Footnotes, Handles, Blade Control, Walk Behind Mowers, Manual No

Handles, Blade Control

Item	Part No	Qty	Description	Note
1	7036353		HANDLE, Upper	(Tecumseh)
	7036354		HANDLE, Upper	(Briggs)
2	7036350		HANDLE, Middle
3	7046502		HANDLE, Lower Left Hand	Was 38467
4	7035342		HANDLE, Lower Right Hand	Was 38466
5	7017072		CONTROL, Blade
6	7033904		CLIP, Blade Control	Was 32829
7	7023820		CABLE, Blade Control	(Briggs) ('90 Models)
	7016121		CABLE, Blade Control	(Tecumseh) ('90 Models)
	7016707		CABLE, Blade Control	(Briggs 3.5 HP) ('91 Models &
				Later)
	7023765		CABLE, Blade Control	(Briggs 3.5 HP) (European
				Models)
	7016121		CABLE, Blade Control	(Tecumseh 3 HP 2-CY.) ('91
				Models & Later)
	7016709		CABLE, Blade Control	(Tecumseh 4 HP 2-CY.) ('91
				Models & Later)
8	7014343	2	BUSHING
9	7023813		CLIP, Cable/Wiring
10	7019263		CONTROL, Throttle	('90 Models)
	7017274		CONTROL, Throttle	('91 Models & Later) (Briggs)
	7019254		CONTROL, Throttle	('91 Models & Later) (European
				Briggs)
	7016706		CONTROL, Throttle	('91 Models & later) (Tecumseh)
11	7023153		CLAMP, Casing
12	7023154		SCREW, #10-32 x 5/8" Self-Tapping	(Briggs)
	7090898		SCREW, 310-32 x 9/32" Self-Tap Sems	(Tecumseh)
13	7023735	4	KNOB, 5/16-18
14	7091013	4	SCREW, 5/16-18 x 2" Curved Head
15	7023745		DECAL, Blade Control
	7023893		DECAL, Blade Control	(European Models)
16	7090816		SCREW, #10-32 x 3/8" Hex Head Cap,	(Briggs)
17	7090799	4	BOLT, 5/16-18 x 5/8" Short Neck Carriage, Grade 5
	7090799	4	BOLT, 5/16-18 x 5/8" Short Neck Carriage	Was 91026 ('91 Models & Later)
18	7091601	4	NUT, 5/16-18 Hex Flange Lock, Grade 5	Was 90585
19	7090122		SCREW, 1/4-28 x 1-3/4" Hex Head Cap, Grade 5
20	7090053		WASHER, 1/4" Internal Tooth Lock	Was 91023
21	7090095		NUT, 1/4-28 Hex, Grade 5 or B	Was 91024

Footnotes:

19" WALK BEHIND MOWERS		Manual No. 7006038
SERIES 7	5	TP 400-5097-3-WB-N