Frigidaire FFBD2403LS Sanitize Option, Status Indicator Lights, To Cancel a Cycle, Water, Washes

OPERATING INSTRUCTIONS

	Cycle Chart			* Includes dry time
Cycle	To Select Cycle	Water		Time*	Washes/
		(approx.)		(Hours)	Rinses
Heavy Wash/Pots & Pans	Select HEAVY WASH/POTS &	9.2	gal.	2 1/2	4 washes
For pots, pans, casseroles and	PANS and desired OPTIONS.
dinnerware with	HI-TEMP WASH will	7.7	imp. gal.		4 rinses
dried-on or baked-on soils.	automatically be provided,	34.7	liters
	SANITIZEoptional.
NormalWash	Select NORMAL WASH and	5.2	gal.	1 3/4	3 washes
For regularly soiled dishes		4.3	imp. gal.		2 rinses
	desired OPTIONS. Selecting
and silverware.		19.7	liters
	HI-TEMP ON or SANITIZE will
	result in a Longer cycle.
LightWash/EcoWash		4.7	gal.	1 1/2	2 washes
For Lightly soiled and pre-rinsed	Select LIGHT WASH/ECO	3.9	imp. gal.		2 rinses
dishes and silverware.	WASH and desired OPTIONS.	17.8	liters
TopRack	Select TOP RACK and desired	3.6	gal.	1 1/4	2 washes
For lightly soiled or pre-rinsed	OPTIONS.	3.0	imp. gal.		1 rinses
dishes and silverware when you		13.6	liters
do not have a full load.
RinseOnly		2.3	gal.	1/4	2 rinses
For rinsing dishes that will be	Select RINSE ONLY.	1.9	imp. gal.
washed later.	DO NOT USE detergent.	8.9	liters

* Sanitize Option

To sanitize your dishes and glassware, select the SANITIZE option. When selected, the light above the pad will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 155°F (68°C) and will maintain that temperature for 9 minutes. This option is available in Heavy and Normal Wash cycles. Only these sanitization cycles have been designed to meet NSF requirements.

The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C).

The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120°F (49°C).

To turn off the SANITIZE option, press the pad a second time. The light above the pad will turn off.

* Status Indicator Lights

The WASHING light comes on at the beginning of cycle and remains on until the end of the main wash.

The DRYING light indicates the drying portion of the cycle. The light will come on when either drying option is selected.

When the SANITIZE option is selected, the SANITIZED light will glow when the SANITIZE cycle is finished. If the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted. The light will remain on until the door is opened.

The CLEAN light will come on at end of cycle and remain on until door is opened.

To Cancel a Cycle

You can cancel a cycle anytime during the cycle. Press START/CANCEL pad and the dishwasher will start a 90 second drain. At the end of the drain, select the desired cycle.

6