17
DECAL IDENTIFICATION
(8) HEIGHT CONTROL INSTRUCTION: Shows
direction of movement of HEIGHT ADJUST HANDLE to
select a change in height if cut from highest cutting
height (clockwise) to the lowest height (counter-
clockwise). Note that there is a total of eleven heights of
cut.
(9) NOISE CONTROL: This unit is certified to be within
the 100 dBA sound power limit at the specified Engine
RPM.
(10) EUROPEAN PERFORMANCE: Maximum level of
vibration measured at the operators hand is 23.4
m/sec2.
(11) OPERATOR PRESENCE CONTROL: Pull control
against handle to start engine and blade. Release
control to stop engine and blade.
(12) GROUND DRIVE: Pull lever against handle to
engage drive. Release lever to disengage drive.
(13) WARNING: DO NOT operate without grass
catcher, side chute or plug installed.
(14) WARNING: Located on the right side of the Mower
Deck. It advises operator of the danger of the rotating
blade.
HEIGHT
CONTROL
DECAL
P/N 2-8454
EUROPEAN NOISE
CONTROL DECAL
2-3009
EUROPEAN
COMMUNITY
DECAL
29776
OPERATOR PRESENCE
CONTROL DECAL
P/N 2-9431
GROUND DRIVE
DECAL
P/N 2-9432
CHUTE DEFLECTOR DECAL P/N 4-6924
WARNING
DECAL
P/N 1-3010