IMPORTANT SAFETY INSTRUCTIONS

SAFE HANDLING OF GASOLINE

(Continued From Previous Page)

3.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

4.DO NOT refuel the machine indoors.

5.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

6.DO NOT fill fuel containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place the containers on the ground away from the vehicle before filling.

7.Remove gas-powered equipment from the vehicle or trailer and refuel it on the ground. If this is not possible, then refuel equipment using a portable container, rather than a gasoline dispenser nozzle.

8.DO NOT start gas powered equipment in enclosed vehicles or trailers.

9.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. DO NOT use a nozzle lock-open device

10.If fuel is spilled on clothing, change clothing immediately.

11.DO NOT overfill a fuel tank. Replace fuel cap and tighten securely.

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage beforestarting.

6.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

9.ALWAYS stay behind handle when engine (motor) is running.

10.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

3

OPERATION

(Continued From Previous Column)

11.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

12.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

13.DO NOT operate mower without the entire grass catcher, discharge guard, rear guard or other safety devices in place and working. DO NOT point discharge at people, passing cars, windows or doors.

14.DO NOT discharge material against a wall or obstruction. Materialmayricochetbacktowardstheoperator.

15.Slow down before turning.

16.Watch out for traffic when near or crossing roadways.

17.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

18.Only use accessories approved by the manufacturer. See manufacturer’s instructions for proper operation and installationofaccessories.

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

7.DO NOT change engine governor speed settings or overspeed engine.

8.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

Page 2 Page 4
Page 3
Image 3
Snapper ECLP21602KWV Operation, Maintenance and Storage, From Previous, Do not refuel the machine indoors
Page 2 Page 4

ECLP21602KWV specifications

The Snapper ECLP21602KWV is a standout addition to the world of lawn mowers, exemplifying a perfect blend of power, efficiency, and user-friendly features. Designed for both residential and commercial use, it caters to a diverse range of lawn care needs by delivering exceptional performance and versatility.

At its core, the Snapper ECLP21602KWV is powered by a robust 21-inch steel cutting deck, ensuring a clean and precise cut every time. This durable deck is engineered to withstand the rigors of grass cutting, providing longevity and reliability for users. The mower operates with a powerful overhead valve engine, delivering dependable power and ensuring efficient fuel consumption, which is crucial for prolonged usage.

One of the main features of the ECLP21602KWV is its innovative cutting height adjustment system. This allows users to customize the cutting height with ease, offering a range of options from 1 to 4 inches. Such flexibility is particularly valuable for maintaining different types of grass and adapting to various seasonal growth patterns.

Another significant technology incorporated in this model is the self-propelling capability, which enables users to maneuver the mower effortlessly across their lawns. The variable speed control allows operators to adjust their pace according to the terrain and grass conditions, ensuring optimal cutting performance without requiring excessive effort.

The Snapper ECLP21602KWV also features a convenient bagging system for easy grass collection. The mower can quickly switch from mulching to bagging mode, allowing users to choose between returning nutrients to the lawn or collecting clippings for disposal. This dual functionality helps maintain a neat lawn appearance while also providing flexibility in lawn care.

Additionally, the mower's design incorporates an ergonomic handle for comfort during operation. The folding handle mechanism facilitates easy storage and transportation, making it an ideal choice for those with limited space.

With its combination of powerful performance, user-friendly features, and versatile cutting options, the Snapper ECLP21602KWV is an excellent investment for anyone looking to achieve a pristine lawn. Whether tackling a small backyard or larger commercial spaces, this lawn mower delivers the reliability and quality that users desire for effective lawn maintenance.
Top Page Image Contents