Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

4.2.4.33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) (Continued)

b.Loosen eccentric shoulder bolt.

c.Turn eccentric "UP" or "DOWN" as required to level deck. See Figure 4.9.

d.Tighten eccentric bolt. Place sector plates back onto rear lift arms and secure with washers and hairpins.

4.2.5.33" DECK LEVEL ADJUSTMENT FRONT TO REAR - SECTOR PLATES

1.Remove hair pins and washers securing sector plates to rear lift arms. See Figure 4.10.

SECTOR PLATES

LOWEST DECK

HIGHESTSETTING

DECK

SETTING

REMOVE HAIR PIN &

WASHER

FIGURE 4.10

2.Move sector plate as required to raise or lower deck.

NOTE: The deck should be set so that the rear of the deck is 1/4" lower than the front. See Figure 4.11.

 

33” DECK SHOWN

FRONT

REAR

X + 1/4”

MEASURE FROM BLADE

TIPS TO FLOOR

FIGURE 4.11

4.2.6.33" DECK LEVEL ADJUSTMENT

FRONT TO REAR - FRONT LIFT ROD

If the sector plates are in their lowest setting and proper level cannot be obtained, adjust the front lift rod as follows:

1.Move deck lift lever to #5 position.

2.Place a 2 x 4 wooden block on edge under front center of deck.

3.Place a 3 x 3 wooden block under rear center of deck.

4.Remove hair pins and washers securing sector plates. Lower rear of deck onto 3 x 3 block.

5.Remove hair pin and washer securing front lift rod to front lift arm. See Figure 4.12.

JAM

NUT

HAIR PIN

WASHER

FRONT LIFT ROD

FIGURE 4.12

6.Remove front lift rod and carefully rest front of deck onto 2 x 4 block.

7.Loosen jam nut on front lift rod. See Figure 4.12.

8.Turn front lift rod hanger block until it can be reinstalled into front lift arm without lifting deck.

9.Secure lift rod to lift arm with washer and hair pin.

10.Place sector plates onto rear hanger brackets and secure with washers and hair pins.

11.Raise deck and remove wooden blocks.

12.Repeat steps for front to rear level until levelness is acquired.

23

Page 21 Page 23
Page 22
Image 22
Snapper ELT150H33IBV Deck Level Adjustment Front to Rear Sector Plates, Deck Level Adjustment Front to Rear Front Lift ROD
Page 21 Page 23

ELT150H33IBV specifications

The Snapper ELT150H33IBV is a versatile and powerful lawn mower designed to meet the needs of homeowners and landscape professionals alike. With a robust engine and a range of innovative features, this machine ensures efficient grass cutting and exceptional performance across various terrains.

At the heart of the ELT150H33IBV is its reliable 150cc engine, which delivers ample power for tackling even the toughest grasses. This engine is designed for fuel efficiency, allowing users to mow their lawns without frequent refueling stops. The recoil start system ensures that the mower is easy to start, providing convenience for users of all experience levels.

One of the standout features of the Snapper ELT150H33IBV is its 33-inch cutting deck. This compact size allows for easy maneuvering in tight spaces, making it ideal for residential yards with intricate landscaping. The cutting deck is constructed with durable materials that withstand the rigors of regular use while ensuring a high-quality cut.

The mower offers multiple cutting height adjustments, allowing users to customize the height of their grass according to their preferences or lawn care needs. This feature is particularly useful for maintaining different types of grass and ensuring a healthy lawn throughout the mowing season.

In terms of technology, the Snapper ELT150H33IBV incorporates a unique Blade Brake system, which enhances safety by stopping the blade immediately when the user releases the handlebar. This ensures that users can quickly stop mowing without needing to turn off the engine, reducing the risk of accidents. Additionally, the mower is equipped with a reliable drive system that ensures smooth operation and improved traction on various surfaces.

The Snapper ELT150H33IBV is designed with user comfort in mind, featuring adjustable handles for better ergonomics. This reduces fatigue during prolonged use, allowing for a more enjoyable mowing experience. Furthermore, the mower's compact design facilitates easy storage, making it an excellent choice for homeowners with limited space.

Overall, the Snapper ELT150H33IBV combines power, versatility, and user-friendly features to provide a reliable lawn care solution. Its advanced technology and robust construction make it a standout choice for anyone looking to maintain a pristine lawn effortlessly. Whether you're a seasoned gardener or a first-time mower, the Snapper ELT150H33IBV offers the performance and reliability you need to tackle any lawn care challenge.
Top Page Image Contents