Deck Level Adjustment Side to Side | Snapper ELT180H33IBV specs

Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

	33” DECK SHOWN
FRONT	REAR

X + 1/4”

MEASURE FROM BLADE

TIPS TO FLOOR

4.2.4.33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) (Continued)

b.Loosen eccentric shoulder bolt.

c.Turn eccentric "UP" or "DOWN" as required to level deck. See Figure 4.9.

d.Tighten eccentric bolt. Place sector plates back onto rear lift arms and secure with washers and hairpins.

4.2.5.33" DECK LEVEL ADJUSTMENT FRONT TO REAR - SECTOR PLATES

1.Remove hair pins and washers securing sector plates to rear lift arms. See Figure 4.10.

SECTOR PLATES

LOWEST DECK

HIGHESTSETTING

DECK

SETTING

REMOVE HAIR PIN &

WASHER

FIGURE 4.10

2.Move sector plate as required to raise or lower deck.

NOTE: The deck should be set so that the rear of the deck is 1/4" lower than the front. See Figure 4.11.

FIGURE 4.11

4.2.6.33" DECK LEVEL ADJUSTMENT

FRONT TO REAR - FRONT LIFT ROD

If the sector plates are in their lowest setting and proper level cannot be obtained, adjust the front lift rod as follows:

1.Move deck lift lever to #5 position.

2.Place a 2 x 4 wooden block on edge under front center of deck.

3.Place a 3 x 3 wooden block under rear center of deck.

4.Remove hair pins and washers securing sector plates. Lower rear of deck onto 3 x 3 block.

5.Remove hair pin and washer securing front lift rod to front lift arm. See Figure 4.12.

JAM

NUT

HAIR PIN

WASHER

FRONT LIFT ROD

FIGURE 4.12

6.Remove front lift rod and carefully rest front of deck onto 2 x 4 block.

7.Loosen jam nut on front lift rod. See Figure 4.12.

8.Turn front lift rod hanger block until it can be reinstalled into front lift arm without lifting deck.

9.Secure lift rod to lift arm with washer and hair pin.

10.Place sector plates onto rear hanger brackets and secure with washers and hair pins.

11.Raise deck and remove wooden blocks.

12.Repeat steps for front to rear level until levelness is acquired.

ELT180H33IBV specifications

The Snapper ELT180H33IBV is an exceptional lawn mower designed for efficiency and ease of use, making it an ideal choice for homeowners looking to maintain their lawns with minimal effort. This mower is part of Snapper’s reputation for producing reliable and high-performance outdoor power equipment, delivering a robust solution for lawn care enthusiasts.

One of the standout features of the ELT180H33IBV is its powerful engine. It is equipped with a 180cc Briggs & Stratton engine, providing ample horsepower to tackle various mowing tasks with ease. This engine is designed for efficiency, ensuring that users can mow larger areas without frequent refueling, which significantly enhances productivity during mowing sessions.

The Snapper ELT180H33IBV features a 33-inch cutting deck, making it compact yet efficient. The size allows for maneuverability in tight spaces, such as flower beds and garden edges, while still covering enough ground to make mowing quicker. The cutting deck height is easily adjustable, offering multiple height settings to achieve the desired grass length, which adds versatility to accommodate different types of lawns.

In terms of technology, the ELT180H33IBV is equipped with a user-friendly starting system. The mower features an easy pull-start mechanism, and the engine is designed to start with minimal effort, ensuring that users can quickly get to work without frustration.

Another important characteristic of this mower is its durability. Snapper has built this model with high-quality materials to withstand the rigors of outdoor use. The rugged construction ensures long-lasting performance, significantly reducing the need for frequent repairs or replacements.

For added convenience, the Snapper ELT180H33IBV incorporates a rear bagging system, which collects clippings for easy disposal. By using the bagging option, homeowners can keep their lawns looking neat and tidy without the hassle of raking.

Moreover, the mower comes with comfortable handles that provide a secure grip, enhancing overall control during operation. This ergonomic design reduces fatigue, making it easier to maneuver the mower over extended periods.

In summary, the Snapper ELT180H33IBV is a well-rounded mower that combines power, versatility, and user-friendly features, making it suitable for those who want an efficient solution for lawn maintenance. With its high-performance engine, compact design, and durable build, it stands out as a reliable choice for homeowners aiming to achieve a pristine lawn with ease.

Snapper ELT180H33IBV important safety instructions Deck Level Adjustment Side to Side

Models: ELT180H33IBV