Section 3 – MAINTENANCE

3.1INTRODUCTION

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

3.2SERVICE - AFTER FIRST 5 HOURS 3.2.1. CHANGE ENGINE OIL

IMPORTANT: Drain fuel tank before tipping machine. DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

1.Refer to Engine Manual for proper oil specifications, procedures and proper service intervals.

2.For simplest/cleanest oil change, loosen lower handle nuts and fold handles. Stand mower up on lower handle brackets as shown in Figure 3.1. Drain oil through dipstick tube into a container. Allow sufficient time for all oil to drain. NOTE: Drive control rod on self-propelled models prohibits handles from folding. Simply tip mower on its side to drain oil.

FIGURE 3.1

3.Dispose of drain oil properly.

4.Fill engine with oil as specified in Engine Manual. Do Not overfill.

NOTE: Check specific model engine owner’s manual for changing engine oil procedure and oil specifications.

3.2.2.CHECK GREASE LEVEL IN TRANSMISSION 1. Remove transmission fill plug. Roll machine forward or backward while looking down into plug hole.

2. If liquid grease IS NOT visible on the input gear (the small gear below the plug hole), add an amount, to cover gear, of Snapper “00” grease. See Figure 3.2.

FILL PLUG

FIGURE 3.2

NOTE: Snapper “00” Grease (Part No. 7029443) is available at your SNAPPER dealer.

NOTE: Do not spill grease or oil on surface of drive disc. See Figure 3.3.

3.Reinstall transmission plug.

4.Check grease level after each 25 hours of operation.

KEEP DRIVE DISC CLEAN !

FIGURE 3.3

IMPORTANT: Drain fuel tank before tipping mower.

DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

11

Page 10 Page 12
Page 11
Image 11
Snapper EP217019BV Service After First 5 Hours 3.2.1. Change Engine OIL, Dispose of drain oil properly
Page 10 Page 12

EP217019BV specifications

The Snapper EP217019BV is a versatile and robust electric lawn mower that combines power and convenience to deliver an exceptional mowing experience. Designed for residential use, this mower is perfect for homeowners looking to maintain their lawns with ease and efficiency.

One of the standout features of the Snapper EP217019BV is its powerful 48V lithium-ion battery system. This battery provides ample power to tackle even the toughest grass while delivering a significant runtime, allowing users to mow larger lawns without the need for frequent recharging. The battery’s quick-charge capability means less downtime, ensuring efficiency and convenience for users.

The 21-inch cutting deck made of high-strength steel ensures durability and longevity, allowing the mower to withstand the rigors of regular use. The cutting deck is not only strong but also lightweight enough to maneuver easily around obstacles in your yard. Moreover, it features a 3-in-1 cutting system that allows users to mulch, bag, or side discharge grass clippings, providing flexibility based on personal preference and lawn conditions.

Another notable characteristic of the Snapper EP217019BV is its adjustable cutting heights, which can be set between 1 to 4 inches. This range enables users to customize their cut for different types of grass and seasonal conditions, achieving the desired appearance for their lawn. The single-lever height adjustment makes switching between different height settings a breeze.

The mower is equipped with an ergonomic handle, designed for comfort during extended mowing sessions. It is also foldable, allowing for easy storage in compact spaces, a practical feature for users with limited storage options.

In terms of technology, the Snapper EP217019BV incorporates advanced brushless motor technology that enhances efficiency and performance while reducing maintenance needs. The brushless motor not only increases battery life but also offers quiet operation, making it suitable for use in residential areas without disturbing neighbors.

Overall, the Snapper EP217019BV stands out as a reliable electric lawn mower, marrying powerful performance with user-friendly features. With its efficient battery system, durable cutting deck, adjustable heights, and advanced technologies, this mower is an excellent choice for anyone looking to maintain a beautiful lawn.
Top Page Image Contents