Section 4 - ADJUSTMENT & REPAIR

4.5BATTERY

4.5.1. BATTERY REMOVAL

1.Raise operator's seat.

2.Remove the two adjusting knobs.

3.Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See Figure 4.41.

REMOVE ADJUSTING

KNOBS AND MOVE

SEAT FORWARD

FIGURE 4.41

4.Remove negative ( - ) cable first.

5.Remove positive ( + ) cable last.

6.Remove battery. See Figure 4.42.

WARNING

Cables must be connected to battery terminals in the proper position as shown in Figure 4.42. DO NOT attempt to charge battery while installed on tractor. DO NOT use "BOOST" chargers on the battery.

REMOVE POSITIVE

(+) CABLE LAST

REMOVE NEGATIVE (-)

CABLE FIRST

FIGURE 4.42

4.5.2.BATTERY INSTALLATION

1.Slide battery into battery housing.

2.Connect positive (+) cable first.

3.Connect negative (-) cable last.

4.Reinstall seat assembly. Use care not to disconnect wires from seat switch.

5.Reinstall the two adjusting knobs.

6.Lower operator's seat.

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda.

4.5.3.BATTERY SERVICE

1.Remove battery. See Section on Battery Removal.

2.Place battery in a well ventilated area on a level surface.

3.Using distilled water, refill cells as required to cover cell plates of which can also be visualized through the plastic battery case.

4.With cell caps removed, connect battery charger to battery terminals. Red to positive (+) terminal and black to negative (-) terminal.

5.Slow charge battery at 1 amp for 10 hours.

6.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery.

4.5.4.BATTERY STORAGE

When out of season, it is recommended the battery be removed, charged and stored.

1.Remove battery. (Refer to Section “BATTERY REMOVAL”).

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the RIDER on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

WARNING

DO NOT attempt to charge battery while installed on the machine. DO NOT use “BOOST” chargers on the battery. DO NOT OVERFILL!

30

Page 30
Image 30
Snapper LT145H33GBV Battery Battery Removal, Battery Installation, Battery Service, Battery Storage

LT145H33GBV, LT145H33GBV, LT145H38GBV, LT150H38GKV specifications

The Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV, and LT145H33GBV represent a series of innovative lawn tractors designed for efficiency, comfort, and durability. These models are tailored for homeowners seeking an effective solution for lawn care, offering a blend of performance and features that set them apart from traditional lawn mowing equipment.

One prominent feature of these tractors is their powerful engines. The LT145H33GBV and LT145H38GBV are equipped with 14.5 HP engines, while the LT150H38GKV sports a more robust 15 HP engine, allowing for higher performance and more demanding tasks. These engines are designed for reliability and longevity, ensuring they can handle various terrains with ease.

Each model is designed with user comfort in mind. The seats are ergonomically designed for prolonged use, featuring adjustable settings to ensure a personalized fit. Additionally, the tractors have easy-to-reach controls, a smooth steering mechanism, and ample legroom, making the mowing experience more enjoyable.

The cutting systems of these Snapper models are notable for their versatility. With a wide cutting deck size of up to 42 inches in the LT145H33GBV and LT145H38GBV, and a slightly larger 50-inch option in the LT150H38GKV, they provide the capability to mow larger areas efficiently. The adjustable cutting heights allow users to customize their lawns' appearance, ensuring the right height for various grass types and conditions. Furthermore, the deck is designed for easy cleaning and maintenance, which prolongs the life of the equipment.

Another key characteristic of these lawn tractors is their innovative technologies. Many models feature Snapper's patented rear-engine design, which enhances visibility and maneuverability. This design reduces the turning radius, allowing for easy navigation around flower beds, trees, and other obstacles in the yard.

Fuel efficiency is a critical factor, and these tractors do not disappoint. They are engineered to optimize fuel consumption while delivering high performance, ensuring that users can maximize their mowing time without frequent refueling.

Safety remains a priority in the design of Snapper lawn tractors. Each model is equipped with safety features such as a seat belt and a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing accidents.

In summary, the Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV, and LT145H33GBV are designed to deliver exceptional performance paired with user comfort and safety. With powerful engines, versatile cutting systems, and innovative features, these tractors are solid choices for homeowners looking to maintain their lawns effortlessly and effectively.