Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

4.2.5.33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE)

(Continued from previous page)

b.Loosen eccentric shoulder bolt.

c.Turn eccentric "UP" or "DOWN" as required to level deck. See Figure 4.9.

d.Tighten eccentric bolt. Place sector plates back onto rear lift arms and secure with washers and hairpins.

4.2.6.33" DECK LEVEL ADJUSTMENT FRONT TO REAR - SECTOR PLATES

1.Remove hair pins and washers securing sector plates to rear lift arms. See Figure 4.10.

SECTOR PLATES

LOWEST DECK

HIGHESTSETTING

DECK

SETTING

REMOVE HAIR PIN &

WASHER

FIGURE 4.10

2.Move sector plate as required to raise or lower deck.

NOTE: The deck should be set so that the rear of the deck is 1/4" lower than the front. See Figure 4.11.

 

33” DECK SHOWN

FRONT

REAR

X + 1/4”

MEASURE FROM BLADE

TIPS TO FLOOR

FIGURE 4.11

4.2.7.33" DECK LEVEL ADJUSTMENT

FRONT TO REAR - FRONT LIFT ROD

If the sector plates are in their lowest setting and proper level cannot be obtained, adjust the front lift rod as follows:

1.Move deck lift lever to #5 position.

2.Place a 2 x 4 wooden block on edge under front center of deck.

3.Place a 3 x 3 wooden block under rear center of deck.

4.Remove hair pins and washers securing sector plates. Lower rear of deck onto 3 x 3 block.

5.Remove hair pin and washer securing front lift rod to front lift arm. See Figure 4.12.

JAM

NUT

HAIR PIN

WASHER

FRONT LIFT ROD

FIGURE 4.12

6.Remove front lift rod and carefully rest front of deck onto 2 x 4 block.

7.Loosen jam nut on front lift rod. See Figure 4.12.

8.Turn front lift rod hanger block until it can be reinstalled into front lift arm without lifting deck.

9.Secure lift rod to lift arm with washer and hair pin.

10.Place sector plates onto rear hanger brackets and secure with washers and hair pins.

11.Raise deck and remove wooden blocks.

12.Repeat steps for front to rear level until levelness is acquired.

20

Page 19 Page 21
Page 20
Image 20
Snapper LT145H33GBV Deck Level Adjustment Side to Side, Deck Level Adjustment Front to Rear Sector Plates
Page 19 Page 21

LT145H33GBV, LT145H33GBV, LT145H38GBV, LT150H38GKV specifications

The Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV, and LT145H33GBV represent a series of innovative lawn tractors designed for efficiency, comfort, and durability. These models are tailored for homeowners seeking an effective solution for lawn care, offering a blend of performance and features that set them apart from traditional lawn mowing equipment.

One prominent feature of these tractors is their powerful engines. The LT145H33GBV and LT145H38GBV are equipped with 14.5 HP engines, while the LT150H38GKV sports a more robust 15 HP engine, allowing for higher performance and more demanding tasks. These engines are designed for reliability and longevity, ensuring they can handle various terrains with ease.

Each model is designed with user comfort in mind. The seats are ergonomically designed for prolonged use, featuring adjustable settings to ensure a personalized fit. Additionally, the tractors have easy-to-reach controls, a smooth steering mechanism, and ample legroom, making the mowing experience more enjoyable.

The cutting systems of these Snapper models are notable for their versatility. With a wide cutting deck size of up to 42 inches in the LT145H33GBV and LT145H38GBV, and a slightly larger 50-inch option in the LT150H38GKV, they provide the capability to mow larger areas efficiently. The adjustable cutting heights allow users to customize their lawns' appearance, ensuring the right height for various grass types and conditions. Furthermore, the deck is designed for easy cleaning and maintenance, which prolongs the life of the equipment.

Another key characteristic of these lawn tractors is their innovative technologies. Many models feature Snapper's patented rear-engine design, which enhances visibility and maneuverability. This design reduces the turning radius, allowing for easy navigation around flower beds, trees, and other obstacles in the yard.

Fuel efficiency is a critical factor, and these tractors do not disappoint. They are engineered to optimize fuel consumption while delivering high performance, ensuring that users can maximize their mowing time without frequent refueling.

Safety remains a priority in the design of Snapper lawn tractors. Each model is equipped with safety features such as a seat belt and a safety switch that automatically shuts off the engine if the operator leaves the seat, preventing accidents.

In summary, the Snapper LT145H33GBV, LT145H38GBV, LT150H38GKV, and LT145H33GBV are designed to deliver exceptional performance paired with user comfort and safety. With powerful engines, versatile cutting systems, and innovative features, these tractors are solid choices for homeowners looking to maintain their lawns effortlessly and effectively.
Top Page Image Contents