Pride Mobility Jet2HD Foot Platform Angle Adjustment, Swing-away Footrests, Elevating Leg Rests

V . C O M F O R T A D J U S T M E N T S

To raise or lower the foot platform:

1.Remove the nuts and bolts from the foot platform bracket. See figure 15.

2.Raise or lower the foot platform to the desired height.

3.Reinstall the nuts and bolts into the foot platform bracket and tighten.

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key.

To adjust the foot platform angle:

1.Loosen the jam nut. See figure 16.

2.Turn the setscrew clockwise to lower the front of the foot platform.

3.Turn the setscrew counterclockwise to raise the front of the foot platform.

4.Tighten the jam nut.

Swing-away Footrests

Swing-away Footrests (SFRs) enable you to rotate the foot- rests to the side before you transfer onto or off of your power chair.

To move the SFRs:

1.Push in the release lever. See figure 17.

2.Move the SFRs.

To adjust the SFR length:

1.Remove the two adjustment screws from the side of each footrest. See figure 17.

2.Slide the footrest in or out to the desired length.

3.Reinstall the two adjustment screws on each footrest.

Elevating Leg Rests

Elevating Leg Rests (ELRs) offer an infinite range of adjust- ment for the leg angle and a footrest adjustment range of 12–19 in.

To rotate the ELRs:

1.Push in release lever A. See figure 18.

2.Rotate the ELRs.

NUTS AND BOLTS

Figure 15. Foot Platform Height Adjustment

SETSCREW

JAMNUT

Figure 16. Foot Platform Angle Adjustment

SFR RELEASE LEVER

FOOTREST

EXTENSION

FOOTREST

ADJUSTMENT

SCREWS

Figure 17. Swing-away Footrests

Jet 2 HD www.pridemobility.com 21