V I I . O P E R A T I O N

Horn Key

The horn key activates the horn.

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.

To lock the VSI:

1.With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.

2.Release the on/off key.

3.Push the joystick to the full forward position until the VSI beeps.

4.Pull the joystick to the full rearward position until the VSI beeps.

5.Release the joystick. There should be a long beep.

6.The VSI is now locked.

To unlock the VSI:

1.Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple up and down.

2.Push the joystick to the full forward position until the VSI beeps.

3.Pull the joystick to the full rearward position until the VSI beeps.

4.Release the joystick. There should be a long beep.

5.The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact your authorized Pride Provider.

Off-board Charger/Programming Socket

The off-board charger/programming socket is located on the front of the VSI. If you use an off-board charger, the charger current should not exceed 8 amps. Contact your authorized Pride Provider for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/programming socket. See your authorized Pride Provider for more information.

NOTE: The socket may also be used for reprogramming the VSI. Contact your authorized Pride Pro- vider for more information.

Controller Connector

This connects the VSI to the power chair’s batteries, motors, and motor brakes.

26

www.pridemobility.com

Jet 2 HD

Page 26
Image 26
Pride Mobility Jet2HD Horn Key, Locking/Unlocking the VSI, Off-board Charger/Programming Socket, Controller Connector