V . C O M F O R T A D J U S T M E N T S
Armrest Width Adjustment
To change the armrest width:
1.Locate the two armrest knobs on the armrest receiver bracket. See figure 13.
2.Loosen the knobs and slide the armrests in or out for the desired width.
3.Tighten the armrest knobs.
Armrest Height Adjustment (Optional)
Your power chair may be equipped with height adjustable armrests. See figure 13.
To change the armrest height:
1.Loosen the setscrew located at the back of the armrest.
2.Raise or lower the armrest to the desired position.
3.Tighten the setscrew.
Armrest Angle Adjustment
You can adjust the armrest angle to fit your specific needs.
To change the armrest angle:
1.Lift the armrest straight up so that it is perpendicular to the floor. See figure 14.
2.Loosen the jam nut.
3.Turn the adjusting screw clockwise to raise the front of the armrest, or turn the screw counterclockwise to lower the front of the armrest.
4.Tighten the jam nut to lock the adjusting screw in place.
Controller Extension Adjustment
The controller can easily slide out away from the armrest, or in toward the armrest. See figure 14.
To extend the controller:
1.Loosen the setscrew at the underside of the armrest..
2.Slide the controller into or out of the armrest to the desired position.
3.Tighten the setscrew.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to one of six different heights in
SETSCREW
| ARMRESTANGLE |
JAMNUT | ADJUSTING SCREW |
|
Figure 14. Underside of Armrest
20 | www.pridemobility.com | Jet 2 HD |
