Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV Front of Tractor

Models: LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV

1 44
Download 44 pages 10.22 Kb
Page 21
Image 21

Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

4.2.8.38" DECK LEVEL ADJUSTMENT (SIDE TO SIDE)

NOTE: Before adjusting deck, bring tire pressure to proper P.S.I.; front 12 P.S.I., rear 12 P.S.I..

1.Move tractor to a firm, level surface.

2.Turn engine “OFF”. Remove key.

3.Place a 2-1/2” tall block under the front of the deck centered between the front lift arms. See Figure 4.13.

FRONT OF TRACTOR

2-1/2” TALL BLOCK

SIDE TO SIDE LEVEL CHECK POINTS

1-3/4” TALL BLOCK

FIGURE 4.13

4.Place a 1-3/4" tall block under the rear of the deck in the center. See Figure 4.13.

5.Position blades as shown and lower deck onto blocks. See Figure 4.13.

6.Disconnect the front lift rod and the rear hanger plates. See Figure 4.14.

7.Put the lift lever in the 3rd position from low cut.

8.Measure the distance from each blade tip to the floor. The measurements should be within 1/8" of each other. (Factory setting)

38” DECK

JAM NUT

WASHER

FRONT LIFT

ROD

HAIR PIN

FIGURE 4.14

9.If the difference is less than 1/8", go to next section, Front to rear level. If the difference is more than 1/8", adjust as described in the following steps.

10.Loosen the front adjuster nut until adjuster moves freely. Then tighten the nut until the adjuster moves only when moderate force is applied to one side of the deck. See Figure 4.15.

FRONT OF TRACTOR

ADJUSTER NUT

FIGURE 4.15

11.Adjust the side to side level of the blade tips by moving one side of the deck up or down as needed to obtain 1/8" or less side to side deck level.

12.After leveling deck, retighten the adjuster nut using

30to 40 ft. lbs.

13.Attach the rear hanger plates to the hole that most closely aligns with the pin on the deck lift bracket. Secure with washer and hair pin.

14.Adjust the swivel on the front lift rod until it lines up with the hole in the front lift bracket. (Make sure the lift rod is at the top of the slot in the deck bracket) Secure with hair pin.

21

Page 20 Page 22
Page 21
Image 21
Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV important safety instructions Front of Tractor
Page 20 Page 22

LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV specifications

The Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV are versatile lawn tractors designed to deliver exceptional performance and efficiency for homeowners and professionals alike. Each model incorporates a host of features and technologies that enhance usability and mowing capabilities.

Starting with the LT145H33HBV, this model is equipped with a powerful Briggs & Stratton engine, providing reliable performance for handling various lawn care tasks. Its 33-inch cutting deck offers maneuverability, making it ideal for smaller to medium-sized yards. The LT145H33HBV also features an automatic transmission that allows for smooth and easy speed adjustments, promoting a more comfortable mowing experience. Its adjustable seat provides additional comfort during longer mowing sessions, and the sturdy construction ensures durability and longevity in outdoor conditions.

The LT145H38HBV model builds upon the foundation of the LT145H33HBV, but it comes with a larger 38-inch cutting deck, which is perfect for tackling larger lawns more efficiently. Like the LT145H33HBV, it features a reliable Briggs & Stratton engine, ensuring powerful performance. The LT145H38HBV is also equipped with Snapper’s proprietary Smart Speed technology, allowing users to easily switch between different speed settings, enabling precision control while navigating around obstacles.

On to the LT150H38HKV, this model offers even more power and features. With a robust 150cc engine and a 38-inch cutting width, it balances power and size perfectly. The LT150H38HKV also includes a high-back seat for enhanced comfort and support. Furthermore, this model integrates integrated mulching capabilities, letting users maintain their lawns effectively by returning valuable nutrients back to the soil. The easy-to-use cutting height adjustment system ensures users can achieve the desired grass length with minimal hassle.

Lastly, the WLT145H38HBV combines innovative technology with user-friendly design. This model stands out with its exceptional maneuverability due to its compact size. The 38-inch cutting deck expertly handles various terrains, making it a great choice for gardens with tight spaces. It incorporates a reinforced deck for added strength and longevity. Additionally, the WLT145H38HBV is designed with a comfortable steering wheel and ergonomic controls, ensuring that users can enjoy a seamless mowing experience.

In summary, Snapper's LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV models are not only equipped with powerful engines and durable cutting decks but also feature technologies that promote user comfort and cutting efficiency. With versatile options suitable for a range of lawn sizes, these tractors are designed to meet the needs of both casual users and serious lawn care enthusiasts.