Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV Battery Testing

Models: LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV

1 44
Download 44 pages 10.22 Kb
Page 31
Image 31

Section 4 - ADJUSTMENT & REPAIR

WARNING

DO NOT OVERFILL! DO NOT attempt to service or charge the battery while it is installed on the machine. DO NOT use “BOOST” chargers on the battery.

4.5.5.BATTERY TESTING

There are two types of battery tests: Unloaded and Loaded. The unloaded test is the procedure that will be discussed. It’s the simplest and most commonly used. An unloaded test is made on a battery without discharging current. To perform unloaded testing, check charge condition using either a hydrometer or voltmeter.

1.Using a voltmeter, voltage readings appear instantly to show the state of charge. Remember to hook the positive lead to the battery’s positive terminal, and the negative lead to the negative terminal.

2.A hydrometer measures the specific gravity of each cell. The specific gravity tells the degree of charge; generally, a specific gravity of about 1.265 to 1.280 indicates full charge. A reading of 1.230 to 1.260 indicates the battery should be charged. The Battery Condition chart below shows the charge level as measured by syringe float hydrometer, digital voltmeter and five ball hydrometer.

4.5.6NEW BATTERY PREPARATION

1.Remove battery from carton.

2.Place battery in a well ventilated area on a level non- concrete surface.

3.Remove battery cell caps. Fill cells as required with electrolyte (purchased separately) to proper level. Fill to 3/16” above cell plates. Filling battery with electrolyte will bring the battery to 80% charged state.

4.With cell caps removed, connect battery charger to battery terminals; RED to positive (+) and BLACK to negative (-) terminal.

IMPORTANT: 3/16” above cell plates is the recommended level. However do not try to measure this dimension. Never place anything in battery other than specified electrolyte.

5.Slow charge the battery at 1 amp for 2 hours to bring the battery to full charge.

6.After charging, check level of electrolyte and add as needed to bring level to 3/16” above cell plates.

7.Reinstall cell caps.

8.Slide battery partially into battery housing.

9.Connect positive (+) cable (red) first, from wiring harness to the positive terminal (+) on battery using bolt and nut provided in hardware bag. Connect negative (-) cable (black) last, to negative terminal (-) on battery using bolt and nut. Apply a small amount of grease over terminals to prevent corrosion.

10.Insert battery completely into battery housing.

11.Reinstall seat assembly.

WARNING

Shield the positive terminal with terminal cover located on battery harness. This prevents metal from touching the positive terminal, which could cause sparks. Cables must be connected to battery terminals in the proper position. RED (Positive) cable must go to the ( + ) terminal. BLACK (Negative) cable must go to the ( - ) terminal.

Battery Condition Chart

 

State of Charge

Syringe Hydrometer

Digital Voltmeter

Five Ball Hydrometer

100%

Charged w/ Sulfate Stop

1.280

12.80v

Five Balls Floating

100%

Charged

1.265

12.60v

Four Balls Floating

75% Charged

1.210

12.40v

Three Balls Floating

50% Charged

1.160

12.10v

Two Balls Floating

25% Charged

1.120

11.90v

One Ball Floating

0% Charged

Less than 1.100

Less than 11.80v

Zero Balls Floating

31

Page 31
Image 31
Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV Battery Testing, NEW Battery Preparation

LT145H33HBV, LT145H38HBV, LT150H38HKV, WLT145H38HBV specifications

The Snapper LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV are versatile lawn tractors designed to deliver exceptional performance and efficiency for homeowners and professionals alike. Each model incorporates a host of features and technologies that enhance usability and mowing capabilities.

Starting with the LT145H33HBV, this model is equipped with a powerful Briggs & Stratton engine, providing reliable performance for handling various lawn care tasks. Its 33-inch cutting deck offers maneuverability, making it ideal for smaller to medium-sized yards. The LT145H33HBV also features an automatic transmission that allows for smooth and easy speed adjustments, promoting a more comfortable mowing experience. Its adjustable seat provides additional comfort during longer mowing sessions, and the sturdy construction ensures durability and longevity in outdoor conditions.

The LT145H38HBV model builds upon the foundation of the LT145H33HBV, but it comes with a larger 38-inch cutting deck, which is perfect for tackling larger lawns more efficiently. Like the LT145H33HBV, it features a reliable Briggs & Stratton engine, ensuring powerful performance. The LT145H38HBV is also equipped with Snapper’s proprietary Smart Speed technology, allowing users to easily switch between different speed settings, enabling precision control while navigating around obstacles.

On to the LT150H38HKV, this model offers even more power and features. With a robust 150cc engine and a 38-inch cutting width, it balances power and size perfectly. The LT150H38HKV also includes a high-back seat for enhanced comfort and support. Furthermore, this model integrates integrated mulching capabilities, letting users maintain their lawns effectively by returning valuable nutrients back to the soil. The easy-to-use cutting height adjustment system ensures users can achieve the desired grass length with minimal hassle.

Lastly, the WLT145H38HBV combines innovative technology with user-friendly design. This model stands out with its exceptional maneuverability due to its compact size. The 38-inch cutting deck expertly handles various terrains, making it a great choice for gardens with tight spaces. It incorporates a reinforced deck for added strength and longevity. Additionally, the WLT145H38HBV is designed with a comfortable steering wheel and ergonomic controls, ensuring that users can enjoy a seamless mowing experience.

In summary, Snapper's LT145H33HBV, LT145H38HBV, LT150H38HKV, and WLT145H38HBV models are not only equipped with powerful engines and durable cutting decks but also feature technologies that promote user comfort and cutting efficiency. With versatile options suitable for a range of lawn sizes, these tractors are designed to meet the needs of both casual users and serious lawn care enthusiasts.