Section 2 - OPERATING INSTRUCTIONS
2.6.ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models
1.With engine "OFF", move to rear of tractor.
2.Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.15.
PULL ROLL RELEASE CONTROL ALL THE WAY OUT TO DISENGAGE HYDRO TRANSMISSION
WARNING
DO NOT disengage the hydro transmission and coast down slopes. DO NOT use Roll Release Control to disengage hydro transmission unless machine motion can be controlled and engine is off.
ROLL RELEASE CONTROL
PUSH ROLL RELEASE CONTROL ALL THE WAY IN TO ENGAGE HYDRO TRANSMISSION
ROLL RELEASE CONTROL
FIGURE 2.15
3.Move tractor to desired location.
4.Set park brake.
5.Push roll release control all the way in to engage hydro transmission. See Figure 2.15.
NOTE: The transmission will not propel the tractor if it is left in the "ROLL" position.
10
