Preparation (Continued) |
|
|
Mounting the Grass Bag |
|
|
1. To mount the grass bag on the mower, raise the rear |
|
|
door (A, Figure 7). Holding the grass bag by the handle |
|
|
(B), mount the hooks (C) on either end of the grass bag |
|
|
frame assembly onto the rear door pivot rod (D). Lower | C | D |
the grass bag against the rear of the mower. Lower the |
|
|
rear door. |
|
|
Important: Make sure both grass bag hooks are mounted on the pivot rod.
| A |
WARNING: Check the condition of the grass | |
bag for wear or deterioration. If worn or | |
damaged, replace the parts only with | |
approved factory replacement parts. |
|
| B |
| Figure 7: M un ng the grass bag |
Emptying the Grass Bag |
|
WARNING: Before you remove the grass bag, | |
stop the engine. Before you rem ve any grass | |
from the mower housing, disconnect the wire | |
from the spark plug. |
|
1. Raise the rear door to a vertical position. |
|
2. Hold the handle of the grass bag and lift the frame | |
assembly. Continue to lift the frame assembly until the | |
hooks are no longer mounted on the pivot | . R move |
the grass bag. |
|
3. Empty the grass from the grass bag. |
|
4. To mount the grass bag on the mower, see “Mounting | |
The Grass Bag”. |
|
Reproduction
Preparation
7