Section 4 - MAINTENANCE

WARNING

Allow engine to cool for at least ten minutes before performing service or maintenance. DO NOT smoke near fuel components when performing service or maintenance. DO NOT perform service and maintenance near an open flame. Wipe off any spilled fuel before starting engine. DO NOT run engine indoors.

4.5ANNUALLY (END OF EACH SEASON) (Continued from previous Page) 4.5.2. FUEL FILTER

Service fuel filter as instructed below. Turn key to “OFF” position. Engine MUST be stopped and MUST be cold before removing filter. Clamp fuel line to prevent fuel spillage or perform filter change when fuel tank and fuel line are empty.

1.Remove fuel line clamps from fuel filter.

2.Remove fuel lines from filter. Discard filter.

3.Install new fuel filter. IMPORTANT: Some fuel filters are fuel flow directional. Check for arrow that shows fuel flow direction. Reinstall fuel line clamps. See Figure 4.8.

LEFT SIDE OF

MACHINE

4.6DECK REMOVAL

Move power unit/mower deck to an area where the mower deck is to be disconnected. Turn engine “OFF” and remove key from switch. Remove spark plug wire(s) and secure away from spark plug(s). Move motion control levers to the neutral position. Engage parking brake.

1.Move deck lift lever and set the mower deck to the highest cutting position. See Figure 4.9.

2.IMPORTANT – STORED ENERGY. Relieve tension on deck lift assist spring by backing off nut on eyebolt. Failure to relive tension could result in personal injury. See Figure 4.9.

3.Place a wooden block under the front and rear edge of the mower deck.

4.Move deck lift lever and set the mower deck to a lower cutting position until deck rests on wooden blocks. Position the deck to where there is no tension on the deck hanger chains. See Figure 4.9.

LOWEST CUTTING

POSITION (ALL THE

WAY FORWARD)

POSITION DECK LIFT LEVER IN HIGHEST CUTTING POSITION. PLACE WOODEN BLOCKS UNDER FRONT AND REAR OF DECK. LOWER DECK ONTO BLOCKS

LOOSEN DECK

CLAMP FUEL LINELIFT ASSIST TO PREVENT

SPILLAGE

REMOVE

FUEL FILTER

 

CLAMP FUEL

REMOVE LINE

LINE TO

PREVENT

CLAMPS

SPILLAGE

 

FIGURE 4.8

FIGURE 4.9

(Continued On Next Page)

17

Page 16 Page 18
Page 17
Image 17
Snapper NZM21521KWV, NZM27611KH, NZM25611KWV important safety instructions Deck Removal
Page 16 Page 18

NZM21521KWV, NZM27611KH, NZM25611KWV specifications

The Snapper NZM25611KWV, NZM27611KH, and NZM21521KWV are part of the Snapper lineup that exemplifies durability, performance, and innovative technology in outdoor power equipment. Each model is designed to handle various lawn care tasks, making them ideal for both residential and commercial use.

Starting with the Snapper NZM25611KWV, this model features a powerful Briggs & Stratton engine that offers reliable starting and efficient fuel consumption. Its cutting deck is made from durable steel, ensuring longevity and resistance to wear and tear. The 25-inch cutting width allows for efficient mowing in tight spaces, while the adjustable cutting height provides versatility for different grass lengths. The model also incorporates the Easy Start system, allowing users to start the mower with minimal effort. With its self-propelled drive system, the NZM25611KWV makes maneuvering easy, even on challenging terrains.

Next, the Snapper NZM27611KH stands out with its enhanced performance capabilities, featuring a robust Honda engine that is renowned for its reliability and low emissions. The 27-inch cutting deck not only improves cutting efficiency but also includes a mulching option, allowing users to return nutrients to the lawn. Its ergonomic design and intuitive controls enhance user comfort, reducing fatigue during extended use. The NZM27611KH is equipped with superior traction control, making it suitable for various landscapes, including hilly areas.

Finally, the Snapper NZM21521KWV is designed for those who require a more compact solution without sacrificing performance. It features a reliable Kohler engine that delivers consistent power and smooth operation. The 21-inch cutting deck is lightweight and easy to handle, perfect for small to medium-sized lawns. The model includes an integrated bagging system, making it easy to collect clippings for a cleaner finish. The adjustable handle height enhances user comfort, allowing for a more personalized mowing experience.

In summary, the Snapper NZM25611KWV, NZM27611KH, and NZM21521KWV each offer distinct features and technologies tailored to meet different mowing needs. With robust engines, durable cutting decks, and user-friendly designs, they stand as testaments to Snapper's commitment to high-quality lawn care solutions. Whether for residential or commercial use, these models ensure efficient and effective lawn maintenance.
Top Page Image Contents