Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper NZM25611KWV, NZM27611KH, NZM21521KWV Traction Belt Tension, Traction Belt Replacement

Models: NZM21521KWV NZM27611KH NZM25611KWV

1 41
Download 41 pages 47.54 Kb
Page 22
Image 22

Section 5 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any maintenance, adjustments or service with engine running. STOP engine. STOP blades. Set brake. Remove key. Remove spark plug wires and secure away from spark plugs. Engine and components are HOT. Avoid serious burns, allow sufficient time for all parts to cool.

5.3TRACTION BELT TENSION

The traction drive belt tension does not require

adjustment. If the belt is slipping, it will have to be replaced.

JAM NUT

J-BOLT

FIGURE 5.9

5.4TRACTION BELT REPLACEMENT

1.Remove clutch to deck belt. See Figure 5.10

2.Loosen jam nut on J-Bolt and turn both nuts out to the end of J-Bolt, reducing spring tension. Unhook traction idler spring from bolt in frame. See Figure 5.9

3.Remove anti-rotation bracket. See Figure 5.10

4.Disconnect the electric clutch from main wire harness.

5.Remove traction belt from around engine pulley and hydro pumps.

6.Install new belt and route around engine pulley and hydro pump pulleys.

7.Reconnect electric clutch to main wire harness.

8.Reinstall anti-rotation bracket and tighten nuts securely.

9.Reattach traction idler spring. Run both nuts all the way to the end of the threads on the J-Bolt. Tighten jam nut securely. See Figure 5.10.

10.Reinstall electric clutch to deck belt onto electric clutch.

UNHOOK TRACTION

 

REMOVE ANTI-

DRIVE IDLER SPRING

 

ROTATION BRACKET

 

 

 

REMOVE CLUTCH

FIGURE 5.10

TO DECK BELT

5.5BLADE BRAKE/ELECTRIC CLUTCH ADJUSTMENT The blade switch engages the electric clutch when pulled out to the “ON” position. When the blade switch is in the “ON” position the cutting blade(s) are engaged. The blade switch disengages the electric clutch when the blade switch is pushed in to the “OFF” position. When the blade switch is in the “OFF” position the cutting blade(s) are disengaged. The electric clutch is adjustable. The blades should stop rotation in 7 seconds or less. If the electric clutch fails to stop the blades rotation in

7seconds, adjustment is necessary.

1.Insert a feeler gauge into the three slots on the electric clutch.

2.Check gap through all three slots in the side of the clutch. The gap should be set at .015.

3.If gap is incorrect rotate nuts in or out to achieve the correct gap. See Figure 5.11.

NOTE: Electric Clutch is shown removed from the machine. Removal is not necessary for adjustment.

INSERT FEELER GAUGE.

GAP SHOULD BE .015

ROTATE NUTS

IN OR OUT

TO ACHIEVE

CORRECT GAP

FIGURE 5.11

22

Page 21 Page 23
Page 22
Image 22
Snapper NZM25611KWV, NZM27611KH, NZM21521KWV important safety instructions Traction Belt Tension, Traction Belt Replacement
Page 21 Page 23

NZM21521KWV, NZM27611KH, NZM25611KWV specifications

The Snapper NZM25611KWV, NZM27611KH, and NZM21521KWV are part of the Snapper lineup that exemplifies durability, performance, and innovative technology in outdoor power equipment. Each model is designed to handle various lawn care tasks, making them ideal for both residential and commercial use.

Starting with the Snapper NZM25611KWV, this model features a powerful Briggs & Stratton engine that offers reliable starting and efficient fuel consumption. Its cutting deck is made from durable steel, ensuring longevity and resistance to wear and tear. The 25-inch cutting width allows for efficient mowing in tight spaces, while the adjustable cutting height provides versatility for different grass lengths. The model also incorporates the Easy Start system, allowing users to start the mower with minimal effort. With its self-propelled drive system, the NZM25611KWV makes maneuvering easy, even on challenging terrains.

Next, the Snapper NZM27611KH stands out with its enhanced performance capabilities, featuring a robust Honda engine that is renowned for its reliability and low emissions. The 27-inch cutting deck not only improves cutting efficiency but also includes a mulching option, allowing users to return nutrients to the lawn. Its ergonomic design and intuitive controls enhance user comfort, reducing fatigue during extended use. The NZM27611KH is equipped with superior traction control, making it suitable for various landscapes, including hilly areas.

Finally, the Snapper NZM21521KWV is designed for those who require a more compact solution without sacrificing performance. It features a reliable Kohler engine that delivers consistent power and smooth operation. The 21-inch cutting deck is lightweight and easy to handle, perfect for small to medium-sized lawns. The model includes an integrated bagging system, making it easy to collect clippings for a cleaner finish. The adjustable handle height enhances user comfort, allowing for a more personalized mowing experience.

In summary, the Snapper NZM25611KWV, NZM27611KH, and NZM21521KWV each offer distinct features and technologies tailored to meet different mowing needs. With robust engines, durable cutting decks, and user-friendly designs, they stand as testaments to Snapper's commitment to high-quality lawn care solutions. Whether for residential or commercial use, these models ensure efficient and effective lawn maintenance.