TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Machine Will Not Move

1.

Motion Control Levers in the neutral “N” position.

Loss Of Traction

2.

Hydro. Pumps in roll release setting.

3.Low transmission hydraulic oil level.

4.Parking Brake engaged.

5.Traction drive belts require replacement.

Blade(s) Not Cutting 1. Blade engagement switch in the “OFF” position.

2.Clutch belt slipping.

3.Mower belt slipping.

4.Electric clutch not functioning.

Cutting Grass 1. Uneven tire pressure.

Improperly

2. Cutting height too low or high.

 

3.

Engine speed too slow.

 

4.

Forward speed too fast.

 

5.

Terraced cut, side to side.

 

6.

Excessive deck pitch, front to rear.

 

7.

Cutting blade(s) dull or damaged.

 

8.

Blade belt slipping.

 

9.

Check electric clutch.

 

10. Check clutch belt.

 

11. Check gearbox for damage.

Poor Grass Discharge

1. Engine speed too slow.

 

2.

Forward speed too fast.

 

3.

Grass is wet.

 

4.

Excessively worn or damaged blade(s).

 

5.

Build up of grass clippings and debris under deck.

 

6.

Improper blade(s) installed on deck.

 

7.

Blade(s) installed improperly on deck.

Battery Will Not Charge

1. Poor cable connections.

 

2.

Bad battery cell(s).

 

3.

Faulty alternator.

CORRECTIVE ACTION

1.Move Motion Controls to desired speed

2.Tighten relief valves.

3.Bring hydraulic oil to proper level.

4.Move parking brake to disengaged position.

5.Replace traction drive belts.

1.Move blade switch to the “ON” position.

2.Replace clutch belt.

3.Replace mower belt.

4.Contact authorized SNAPPER dealer.

1.Bring to proper pressure.

2.Adjust cutting height.

3.Move throttle control to “FAST” position.

4.Move joystick to a slower speed.

5.Adjust side to side level.

6.Adjust front to rear level.

7.Sharpen cutting edges or replace blade(s).

8.Replace blade belt.

9.Adjust to proper specifications.

10.Replace clutch belt.

11.Contact authorized SNAPPER dealer.

1.Move throttle control to “FAST” position.

2.Move joystick to a slower speed.

3.Mow when grass is dry.

4.Service mower blade(s).

5.Clean deck.

6.Install proper SNAPPER blades.

7.Install blades properly.

1.Clean cables and battery terminals.

2.Replace with new battery.

3.Contact engine manufacturer’s dealer.

30

Page 30
Image 30
Snapper NZM19482KWV, NZM21522KWV, NZM25612KWV, NZM27612KH important safety instructions Machine Will Not Move

NZM25612KWV, NZM19482KWV, NZM21522KWV, NZM27612KH, NZM19482KWV, NZM21522KWV, NZM25612KWV, NZM27612KH, NZM21522KWV, NZM19482KWV, NZM25612KWV, NZM27612KH, NZM27612KH, NZM19482KWV, NZM21522KWV, NZM25612KWV specifications

The Snapper series of zero-turn mowers, including models NZM25612KWV, NZM19482KWV, NZM21522KWV, and NZM27612KH, are designed to deliver optimal performance, exceptional comfort, and cutting-edge technology for residential and commercial lawn care. Each model presents unique characteristics tailored to different mowing needs, making them suitable for various landscaping tasks.

The NZM25612KWV stands out with its powerful 25 horsepower engine, coupled with a robust 52-inch cutting deck. The cutting height adjustment feature allows for precision mowing, enabling users to achieve their desired grass length effortlessly. This model is particularly appreciated for its impressive maneuverability, making it ideal for navigating around obstacles in large yards or commercial properties.

On the other hand, the NZM19482KWV offers a slightly smaller footprint with a 48-inch cutting deck powered by a 19 horsepower engine. This model is perfect for homeowners with smaller lawns while still providing the efficiency and speed of a zero-turn mower. The compact design allows for easy storage, while the comfortable seating and intuitive controls contribute to a seamless mowing experience.

The NZM21522KWV combines the best of both worlds, featuring a 22 horsepower engine and a 54-inch cutting deck. This model is designed for those who require a balance between power and cutting width, making it versatile for both residential and commercial use. Additionally, its advanced vibration-dampening technology ensures comfort, even during extended mowing sessions.

Then there's the NZM27612KH, which boasts an impressive 27 horsepower engine paired with a 60-inch cutting deck. This powerhouse model is specifically engineered for large properties and professional landscapers who demand reliability and efficiency. With an expanded fuel tank and heavy-duty construction, it tackles extensive mowing tasks with ease, providing a crisp and clean cut every time.

In terms of technology, all the Snapper models incorporate user-friendly features such as electric deck lift options, easy-to-read LED displays for monitoring speed and battery life, and enhanced safety mechanisms. These models are also built with high-quality materials, ensuring durability and longevity in performance. Special attention is given to ease of maintenance, with accessible components for quick servicing and repairs.

Overall, Snapper mowers like the NZM25612KWV, NZM19482KWV, NZM21522KWV, and NZM27612KH not only elevate the gardening experience through their innovative design and advanced engineering but also enhance productivity for both at-home lawn care enthusiasts and professional landscapers alike.