Snapper R194014 Maintenance, Annually End Of Each Season, Air Filter, Engine Oil

Models: R194014

1 20
Download 20 pages 20.77 Kb
Page 10
Image 10

Section 3 - MAINTENANCE

3.3 ANNUALLY (END OF EACH SEASON)

Perform all maintenance as described in the maintenance schedule.

3.3.1. Engine

Service engine according to engine owner’s manual.

3.3.2. Air Filter

Refer to engine owner’s manual for service instructions.

3.3.3. Engine Oil

Refer to engine owner’s manual for service instructions.

3.4 STORAGE PROCEDURE

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

1.Drain fuel from fuel tank and let engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

4.Tilt mower up on its rear wheels and thoroughly clean the underside of the deck. Do not tilt mower with spark plug or carburetor down. Scrape away any accumulation of grass with a putty knife and or wire brush.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.Loosen handle knobs. Carefully fold the handles forward, “flexing” the control cables to prevent cable damage.

7.Store the mower in a shed or other dry area, protected from weather.

10

Page 10
Image 10
Snapper R194014 Maintenance, Annually End Of Each Season, Air Filter, Engine Oil, Storage Procedure