Section 2 - OPERATING INSTRUCTIONS
2.3STOPPING
Stop engine and blade by releasing the blade control. See Figure 2.6.
RELEASE BLADE
CONTROL TO STOP
ENGINE & BLADE
BLADE
CONTROL
FIGURE 2.6
WARNING
DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.
2.4HANDLE HEIGHT ADJUSTMENT
The height of the mower handle can be adjusted as follows:
1.Loosen the two nuts on the inside of each of the lower handles as shown in Figure 2.7.
2.Move the handle up or down to the desired height.
3.Retighten all nuts securely after adjustment.
LOOSEN NUTS TO
ADJUST HANDLE
HEIGHT
FIGURE 2.7
7
