Section 2 - OPERATING INSTRUCTIONS
2.3STOPPING
Stop engine and blade by releasing the blade control. See Figure 2.6.
RELEASE BLADE
CONTROL TO STOP
ENGINE & BLADE
BLADE
CONTROL
FIGURE 2.6
WARNING
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
2.4HANDLE HEIGHT ADJUSTMENT
The height of the mower handle can be adjusted as follows:
1.Loosen the two nuts on the inside of each of the lower handles as shown in Figure 2.7.
2.Move the handle up or down to the desired height.
3.Retighten all nuts securely after adjustment.
LOOSEN NUTS TO
ADJUST HANDLE
HEIGHT
FIGURE 2.7
7
