Section 3- MAINTENANCE

3.1INTRODUCTION

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

3.2SERVICE - AFTER FIRST 5 HOURS 3.2.1. CHANGE ENGINE OIL

HONDA ENGINE

OIL FILL

CAP

FIGURE 3.1B

IMPORTANT: Drain fuel tank before tipping machine.

DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the

engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

1. Refer to Engine Manual for proper oil specifications, procedures and proper service intervals.

2.For simplest/cleanest oil change, loosen lower handle nuts. Remove two of the four bolts and fold

handles. Stand mower up on lower handle brackets as

shown in Figure 3.1A. Drain oil through dipstick tube into a container. Allow sufficient time for all oil to drain.

3.Alternate Oil Drain: Procedure: The Honda engines are equipped with oil fill caps. See Figure 3.1.B. Remove oil fill cap, tip machine to drain oil. Allow sufficient time for all oil to drain. Reinstall cap and tighten securely.

FIGURE 3.1A

4.Dispose of drain oil properly.

5.Fill engine with oil as specified in Engine Manual. Do Not overfill.

3.2.2.CHECK GREASE LEVEL IN TRANSMISSION 1. Remove transmission fill plug. Roll machine

forward or backward while looking down into plug hole.

2.If liquid grease IS NOT visible on the input gear (the small gear below the plug hole), add an amount, to cover gear, of Snapper "00" grease. See Figure 3.2.

/

FILL PLUG

FIGURE 3.2

NOTE: Snapper "00" Grease (Part No. 2-9443)is available at your SNAPPER dealer.

12

Page 11 Page 13
Page 12
Image 12
Snapper RP2167517BVE important safety instructions Introduction, Service After First 5 Hours 3.2.1. Change Engine OIL
Page 11 Page 13

RP2167517BVE specifications

The Snapper RP2167517BVE is a versatile and powerful riding mower, engineered for homeowners seeking efficiency and comfort in lawn care. Designed with a 21 horsepower Briggs & Stratton engine, this mower provides more than just power; it boasts exceptional reliability, ensuring a consistent performance on various terrains. One of its standout features is the professional-grade, 42-inch dual-blade cutting deck, which allows for precise cutting and an impressive turnaround radius that enhances maneuverability around your yard.

Equipped with a unique hydrostatic transmission, the RP2167517BVE offers seamless speed control and smooth handling, allowing users to easily navigate tricky landscapes. The foot-operated automatic transmission provides the rider with the ability to accelerate or decelerate without the complexity of manual shifting. This means that mowing becomes less of a chore and more of an enjoyable task, even in larger properties.

Comfort is a major highlight of the Snapper RP2167517BVE. It comes with an adjustable high-back seat designed to reduce fatigue during extended mowing sessions. The position is customizable to suit different user preferences, allowing for an ergonomic driving experience. Furthermore, the intuitive control panel places essential functions within easy reach, making it straightforward to operate.

In addition to these features, the RP2167517BVE is compatible with various attachments, including baggers, mulchers, and snow blades, making it a multi-season workhorse for lawn and garden maintenance. The sturdy build of the mower is complemented by robust safety features, such as an automatic engine shut-off when the operator leaves the seat.

Another technological advantage of the Snapper RP2167517BVE is its tough construction, featuring a welded steel frame that stands up to rigorous use. The mower is also designed for easy maintenance, with access points that allow for quick cleaning of the deck and adjustments.

Overall, the Snapper RP2167517BVE combines power, comfort, and advanced technology to provide a superior mowing experience. Whether tending to a sprawling lawn or navigating tight spaces, this riding mower delivers performance and reliability that meet the demands of any homeowner.
Top Page Image Contents