Belt Service | Snapper RP2167517BVE guide

Section 4 - REPAIR & ADJUSTMENTS

j_ WARNING _,

DO NOT attempt any maintenance, adjustments or servicewith engine and blade running.STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficienttime for allcomponents to cool.

4.3.6.Replacement Of Bearing On Pulley End Of

Hex Shaft

To replace the bearing on the pulley end of the hex shaft, proceed as follows:

1.Hold the hex shaft with an adjustable wrench held next to the pulley.

2.Remove the 3/8" hex lock nut, which is located on the outside of the right wheel bracket. See Figure 4.14.

3.Remove holder, O-ring and bearing.

4.Install new bearing.

5.Carefully install new O-ring over the outside of the new bearing.

6.Install bearing holder and secure with screws.

7.Install 3/8" hex lock nut.

7/--'7,BALL BEARING

3/8"

LOCK NUT

BALL BEARING

HOLDER

FIGURE 4.14

4.4BELT SERVICE

On self-propelled mowers, the engine belt transmits power from engine to drive disc. The drive disc powers the poly-v belt, which engages the transmission that powers the rear wheels. Should these belts become worn, they could cause slippage, which would impair mower performance. The condition of the engine belt and poly-v belt should be checked after every 25 hours of mower operation.

4.4.1.Engine Drive Belt Replacement (Stretch Type Belts)

1.Empty the fuel tank.

2.Note the belt routing in Figure 4.15. There is no idler pulley on these models to disconnect. See Figure 4.15.

DRIVE BELT

o /

,,";4'--

I I rx',	Lo ,wo, c
\\ %	/111

TOP VIEW OF STRETCH TYPE BELT ROUTING

FIGURE 4.15

RP2167517BVE specifications

The Snapper RP2167517BVE is a versatile and powerful riding mower, engineered for homeowners seeking efficiency and comfort in lawn care. Designed with a 21 horsepower Briggs & Stratton engine, this mower provides more than just power; it boasts exceptional reliability, ensuring a consistent performance on various terrains. One of its standout features is the professional-grade, 42-inch dual-blade cutting deck, which allows for precise cutting and an impressive turnaround radius that enhances maneuverability around your yard.

Equipped with a unique hydrostatic transmission, the RP2167517BVE offers seamless speed control and smooth handling, allowing users to easily navigate tricky landscapes. The foot-operated automatic transmission provides the rider with the ability to accelerate or decelerate without the complexity of manual shifting. This means that mowing becomes less of a chore and more of an enjoyable task, even in larger properties.

Comfort is a major highlight of the Snapper RP2167517BVE. It comes with an adjustable high-back seat designed to reduce fatigue during extended mowing sessions. The position is customizable to suit different user preferences, allowing for an ergonomic driving experience. Furthermore, the intuitive control panel places essential functions within easy reach, making it straightforward to operate.

In addition to these features, the RP2167517BVE is compatible with various attachments, including baggers, mulchers, and snow blades, making it a multi-season workhorse for lawn and garden maintenance. The sturdy build of the mower is complemented by robust safety features, such as an automatic engine shut-off when the operator leaves the seat.

Another technological advantage of the Snapper RP2167517BVE is its tough construction, featuring a welded steel frame that stands up to rigorous use. The mower is also designed for easy maintenance, with access points that allow for quick cleaning of the deck and adjustments.

Overall, the Snapper RP2167517BVE combines power, comfort, and advanced technology to provide a superior mowing experience. Whether tending to a sprawling lawn or navigating tight spaces, this riding mower delivers performance and reliability that meet the demands of any homeowner.

Snapper RP2167517BVE Replacement Of Bearing On Pulley End Hex Shaft, Belt Service

Models: RP2167517BVE