Section 1 - FAMILIARIZATION
BLADE
CONTROL
GROUND SPEED CONTROL
(NOT ALL MODELS)
IMPORTANT
The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions.
WHEEL DRIVE CONTROL (NOT ALL MODELS)
ROPE START
HANDLE
FUEL FILLER
CAP OIL FILL CAP
AND DIPSTICK
REAR HEIGHT ADJUSTMENT LATCH
ENGINE |
PRIMER |
RECYCLING COVER
FRONT HEIGHT
ADJUSTMENT LATCHES
FIGURE 1.1
(MODEL SPV21 SHOWN)
1.1 INTRODUCTION
This manual has been prepared for the operators of the SNAPPER ‘EASY LINE’ WALK BEHIND MOWERS. Its purpose, aside from recommending operating and routine service requirements, is to promote safety through the use of accepted operating practices. Read, Understand and Follow the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4 of this manual and all safety messages on the mower and attachments before operating the mower.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the essential parts of the SNAPPER ‘EASY LINE’ WALK BEHIND MOWERS. It is recommended that all operators of the mower become thoroughly familiar with the controls, parts and operation of the mower before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference.
6
