Snapper SPLH151KH SPA360, SPA521, SPA611 Deck weldment 7042461 plus, Deck weldment 7041809 plus

48" & 52" MOWER DECK ASSEMBLY (Fixed Height)

Item	Part No	Qty	Description	Note
1	7013010	1	DECAL, Warning (CPSC Cut Finger)
2	7073647	1	DECAL, Danger Guard/Catcher
3	7023735	4	KNOB, Hood (5/16-18 thread)
4	7024156	1	DECAL, Caution- Operator Instruction
5	7027327	1	PIVOT, Roller Pin (Weldment)
6	7027344	2	WASHER, 5/8” Flat
7	7027950	1	SPRING, Chute
8	7029249	1	PULLEY, Driven, 5-3/4” O.D.
9A	7029261	1	* V-BELT, Secondary 48” (113” Long)
9B	7029266	1	* V-BELT, Secondary 52” (120” Long)
10A	7029262	1	* V-BELT, Primary 48” (66” Long)
10B	7029267	1	* V-BELT, Primary 52” (69” Long)
11	7072915	1	SPRING, Extension, Primary Idler
12	7029277	1	HINGE PIN, Chute
13	7029278	1	SPRING, Idler
14	7029281	4	STANDOFF, 4-1/2” Long (5/16-18 thread top; 3/8-16 bottom)
15	7091313	1	COTTER PIN, 3/32 x 1”
16	7046580	1	DECAL, SNAPPER Pro w/Trademark
17A	7058873	1	DEFLECTOR, 48” ANSI Compliant (Weldment)
17B	7058285	1	DEFLECTOR, 52” Euro Chute
18A	7054013	1	COVER, 48” Deck
18B	7054014	1	COVER, 52” Deck
19	7054020	2	ASSEMBLY, Caster Red (Fixed Deck)	see Caster, Wheel & Tire
				Assembly page
20A	7054022	1	ASSEMBLY, 48” Deck (Fixed Height)	Deck weldment (7042461) plus
				4 bushings (7023556)
20B	7054027	1	ASSEMBLY, 52” Deck (Fixed Height)	Deck weldment (7041809) plus
				4 bushings (7023556)
21	7054023	1	ASSEMBLY, Idler- 3 Spindle Deck
22	7076998	2	LUBE FITTING, 1/4-28 Straight
23	7079226	3	ROLLER, Low Density Polyethylene
24	7091299	8	NUT, 3/8-16 Hex Nyloc
25	7091304	8	BOLT, 3/8-16 x 1” Hex Head Cap, GR 5
26	7091305	2	SCREW, 3/8-16 x 2” Hex Head Cap, GR5
27	7090613	4	NUT, 3/8-16 Hex Flange Lock
28	7046626	4	BUSHING, Caster
29	7054011	3	ASSEMBLY, Spindle	see Cutter Housing Assembly
				Page

Footnotes:

NOTE: * Part numbers are printed on belts.

PRO HYDRO		Manual No. 7006928
SERIES 1 & 2	41	TP 400-5023-4-CW-N