Snapper SPA521, SPA611 For 36 2 blades or 52 decks, Blades, For 61 decks or use, High lift blade

CUTTER HOUSING ASSEMBLY

Item	Part No	Qty	Description	Note
1	7029422	2	BEARING, Sealed
2	7029270	1	WASHER, Spindle
3	7029274	1	SNAP-RING, Spindle Shaft
4	7059311	1	ASSEMBLY, Spindle Shaft
5	7029254	1	SPACER, Bearing
6	7029271	4	SPACER, Blade
7A	7073395	3	BLADE, Commercial, 18” Low Lift	for 36” (2 blades) or 52” decks
				(3 blades)
7B	7073396	3	BLADE, 21” Low Lift	for 61” decks; (or use 7075770,
				high lift blade)
7C	7075771	3	BLADE, 16-1/2”	for 48” deck
8	7016440	1	WASHER, Beveled
9	7029256	1	BOLT, 5/8-18 x 7-1/2” Hex Head Cap, GR 5
10	7029275	1	LUBE FITTING, 1/4-28 Straight (Thread Forming)
11	7029252	1	* HOUSING, Cutter
12	7029384	1	GREASE VENT, Spindle
13	7029302	6	BOLT, 3/8-16 x 1-1/4” Rib Necked
14	7029245	1	PULLEY, 5-3/4” O.D.	for 48”, 52” & 61” decks
14	7029249	1	PULLEY, 5-3/4” O.D. w/Hub	for 36” deck
15	7091736	1	NUT, 5/8-18 Hex Flange Lock, GR 5
16	7091299	6	NUT, 3/8-16 Hex Nyloc
17	7063238	1	** SEAL, Nylos
18	7013370	1	** WASHER

Footnotes:

NOTE: * 7054017, Spindle Housing sub-assembly is made of items 11, 12 & 13.

NOTE: ** To install Bearing Pre-Seal Kit (7063240) discard item 3 & replace with items 17 & 18 as shown.

PRO HYDRO		Manual No. 7006928
SERIES 1 & 2	55	TP 400-5023-4-CW-N