Section 2 - OPERATING INSTRUCTIONS

2.3MOTION CONTROL

IMPORTANT: This machine is equipped with hydrostatic drive. The direction and speed of movement are controlled by dual motion control levers. A small amount of movement of either lever may cause the machine to move instantly, and can result in severe injury or damage. Operate levers slowly and smoothly.

To safely develop driving skills, practice driving the machine with blades disengaged, engine speed at a slow setting, in an open area away from people and obstacles. (To safely roll the machine into an open area, refer to Section “ROLLING MACHINE MANUALLY”.)

2.3.1. GETTING READY

1.Sit squarely in the operator seat, with feet firmly on the footrest.

2.Be sure Blade Switch is pushed in to its off (‘0’) position. See Figure 1.7.

3.Start engine.

4.Disengage parking brake. See Figure 1.6.

5.Drop both motion control levers down and in toward the center of the machine, and rest elbows comfortably on armrests. See Figure 2.3.

5.DROP LEVERS

1.SIT SQUARELY IN SEAT

2. MAKE SURE

3. START ENGINE

BLADE SWITCH

 

IS OFF (‘0’)

4. DISENGAGE

 

PARKING BRAKE

 

FIGURE 2.3

2.3.2. FORWARD MOTION

Slowly and equally push both levers forward. See Figure 2.4. The farther you push, the faster the machine will go. (Machine speed can be further adjusted with the engine throttle control; return motion control levers to their neutral lock positions before adjusting engine throttle.)

DIRECTION

OF TRAVEL

FIGURE 2.4

NOTE: If, with equal pressure applied to both motion control levers, machine ‘tracks’ (veers) right or left, refer to Section “MOTION CONTROL ADJUSTMENTS”.

2.3.3. REVERSE MOTION

Slowly and equally pull both levers toward the back of the machine. See Figure 2.5. Note that the machine travels much slower in full reverse than in full forward. Do not attempt adjustment of this important safety feature.

DIRECTION

OF TRAVEL

FIGURE 2.5

WARNING

DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing.

9

Page 9
Image 9
Snapper SZT18426BVE, SZT20486BVE Motion Control, Getting Ready, Forward Motion, Reverse Motion

SZT18426BVE, SZT20486BVE specifications

The Snapper SZT18426BVE and SZT20486BVE are advanced lawn care machines designed for homeowners and professionals who demand high performance and reliability in their lawn maintenance tasks. Both models exhibit a combination of power, versatility, and user-friendly features that make them stand out in the market.

The Snapper SZT18426BVE is equipped with an 18 horsepower engine, making it a robust performer for various lawn sizes and types. Its cutting deck is 26 inches wide, which allows for efficient mowing even in tighter spaces. The SZT20486BVE takes it up a notch with a more powerful 20 horsepower engine and a wider 48-inch cutting deck, enabling it to cover more ground quickly, making it ideal for larger properties.

One notable feature of both models is the Zero-Turn technology, which allows for unmatched maneuverability. This function enables the operator to turn on a dime, facilitating access to corners and obstacles with ease. This is particularly beneficial for mowing around trees, flower beds, and other landscaping features. The comfort of the operator is also a priority; both models come with fully adjustable high-back seats that provide ample support during extended use.

Equipped with advanced cutting technologies, these Snapper models feature a patented mowing system that ensures a precise cut while maintaining the health of the grass. The adjustable cutting height offers versatility to achieve the desired grass length, accommodating various lawn conditions and preferences.

Moreover, both the SZT18426BVE and SZT20486BVE are designed with durability in mind. Their rugged frames and heavy-duty components ensure long-lasting performance, making them investments that stand the test of time. Additionally, maintenance is straightforward with easily accessible parts and a simple design that allows users to keep their machines in peak condition with minimal effort.

Safety features, such as the operator presence control, ensure that the mower will stop when the operator is not in a seated position, providing peace of mind during use. Both models also come with an easy-to-use dashboard that allows for quick adjustments on the go, including speed control and blade engagement.

Overall, the Snapper SZT18426BVE and SZT20486BVE are excellent choices for those seeking efficient, reliable, and user-friendly zero-turn lawn mowers that combine power and innovative features for a superior mowing experience.