Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. DO NOT attempt to service or charge the battery while it is installed on the SCRAMBLER. Shield the positive terminal with terminal cover located on battery harness. This prevents metal from touching the positive terminal, which could cause sparks. Cables must be connected to battery terminals in the proper position as shown.

4.4MOWER BLADE REPLACEMENT 4.4.3. BLADE REPLACEMENT

1.Remove blade(s). See Figure 4.17. Replace blade(s) if it shows signs of excessive wear or damage. See chart below for replacement

BLADE REPLACEMENT CHART

33”

Blade

1-9523

38”

Blades

2-4466 (Requires Two)

4.5BATTERY

4.5.1. BATTERY REMOVAL

1.Tilt seat up to gain access to battery.

2.Observe and note cable positions on battery. See Figure 4.18.

3.Disconnect cables from battery terminals, disconnecting BLACK (Negative) cable first. Disconnect RED (Positive) battery cable. Slide battery from battery cradle.

4.Retain mounting bolts and nuts for future use.

4.5.2.BATTERY INSTALLATION 1. Slide battery into battery cradle.

2. Connect cables to battery terminals. Connect RED (Positive) cable first. Connect BLACK (Negative) cable. See Figure 4.18.

3. Place the positive (+) terminal insulator over positive terminal and cable. See Figure 4.18.

4.5.3.BATTERY SERVICE

1.Remove battery. Refer to Section “BATTERY REMOVAL”.

2.Place battery in a well-ventilated area on a level surface.

3.Using distilled water, refill cells as required to cover cell plates of which can also be visualized through the plastic battery case.

4.With cell caps removed, connect battery charger to battery terminals. Red to positive (+) terminal and black to negative (-) terminal.

5.Slow charge battery at 1 amp for 10 hours.

6.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery, Part Number 6-0753.

BLACK

NEGATIVE (-)

CABLE

RED

POSITIVE (+)

CABLE

FIGURE 4.18

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda. DO NOT attempt to charge battery while installed on the SCRAMBLER. DO NOT use “BOOST” chargers on the battery. If battery is removed, DO NOT operate engine without insulating Positive + battery cable terminal with electrical tape, or sparking from the battery cables can result.

4.5.4. BATTERY STORAGE

When SCRAMBLER is to be stored out of season, it is recommended the battery be removed, charged and stored.

1.Remove battery. (Refer to Section “BATTERY REMOVAL”).

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the SCRAMBLER on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

23

Page 22 Page 24
Page 23
Image 23
Snapper YZ18336BVE, YZ18386BVE Blade Replacement Chart, Mower Blade Replacement 4.4.3. Blade Replacement, Battery Service
Page 22 Page 24

YZ18386BVE, YZ18386BVE, YZ18336BVE, YZ18386BVE specifications

Snapper, a renowned name in the lawn care industry, offers a diverse range of powerful and efficient mowers suitable for both residential and commercial landscaping needs. Among their exceptional models are the Snapper YZ18336BVE, YZ18386BVE, and YZ18386BVE, each designed to deliver impressive performance and durability.

The Snapper YZ18336BVE is equipped with a robust 18-horsepower engine, providing ample power for tackling various lawn conditions. With a cutting width of 36 inches, this mower offers efficient grass cutting while navigating through tight spaces with ease. This model features a lightweight and durable steel deck, ensuring longevity and resistance to wear-and-tear. The YZ18336BVE also incorporates a comfortable, adjustable seat that enhances user experience during prolonged mowing sessions. Additionally, its heavy-duty wheels offer stability on uneven terrain, making it a reliable choice for homeowners and professionals alike.

Moving to the Snapper YZ18386BVE, this model takes the power up a notch with its 18-horsepower engine and increases the cutting width to an impressive 38 inches, allowing for enhanced productivity. The YZ18386BVE boasts Snapper's signature Easy Start technology, which guarantees quick and hassle-free engine startup every time. This model features advanced cutting technologies like the mulching capability and side discharge options, providing versatility in grass management. The robust design of the YZ18386BVE makes it ideal for tackling larger yards and commercial spaces while ensuring the highest standards of performance.

While the specifications and features of the YZ18386BVE are striking, it's important to note that the YZ18386BVE repeats its excellent performance attributes, showcasing Snapper's commitment to consistency and reliability across its product line. Users can expect the same powerful engine options and innovative design elements that make the YZ18386BVE a top-choice mower.

In conclusion, Snapper's offerings, including the YZ18336BVE and YZ18386BVE, exemplify the brand's dedication to quality and user satisfaction. With features such as powerful engines, durable steel construction, versatile cutting options, and user-friendly designs, Snapper mowers cater to various lawn care needs. Whether you are a homeowner looking to maintain your garden or a landscaping professional seeking robust equipment, Snapper's YZ18336BVE and YZ18386BVE models are perfect choices that promise performance and reliability.
Top Page Image Contents