Connections Properties — ACCEPTOR MODE Accessibility
• Not Connectable: Select to prevent the CSA from connecting to other
devices.
• Connectable: Select to allow other devices to connect to the CSA.
• Connectable and Discoverable: Selected by default.
• Only when DTR is asserted by the local host: Check ONLY IF you
know that the local host sends DTR (Data Terminal Ready) signals. If
you are not sure, uncheck the box.
Important!
If you check Only when DTR is asserted by local host, the CSA will
only become discoverable and/or connectable after receiving DTR
signals from the local host. If you are not sure whether your local
host sends DTR signals, or if you have trouble connecting,
UNCHECK this box.
Notifications
• Notify local host of Bluetooth events: Selected by default.
• Do not generate notification: Select if your local host cannot accept
notifications of Bluetooth events, or if you are not sure whether or not
your local host can accept them.
Note: Notifications may be useful if you are writing custom software for
the CSA. Your software would decide how to process notifications.
CHAPTER 3: CONFIGURATION UTILITY 27